User's Manual
Table Of Contents
- 1. Package-opened Inspection
- 2. Preparation
- 3. Radio Overview
- 4. Basic Operation
- 5. Programmable Key Function
- 6. Auxiliary functions
- 6.1 TOT Timer
- 6.2 battery saving
- 6.3 Low battery alarm
- 6.4 Number announcement
- 6.5 Quite Talk (QT) / Digital Quiet Talk (DQT)
- 6.6 Dual Tone Multi-Frequency (DTMF) Coding
- 6.7 Talkaround
- 6.8 Scan
- 6.8.1 Start/End Scan Function
- 6.8.2 Nuisance Delete
- 6.9 Transmission Begin and Transmission End Signals (PTT ID)
- 6.10 Lone worker
- 6.11 Emergency Alarm
- 7. Wired Clone Mode
- 8. Trouble Shooting Guide
- 9. Major Specifications
Page 14 of 22
2. Volume:
You can press the key programmed to “cancel squelch” to receive background noise and then turn the
Power/Volume key to adjust the volume.
3. Channel:
Turn the channel selector know to select the required channel. When the correct signal is received,
you can hear sounds from the speaker.
4. Transmission:
To send a call, press the PTT key and speak to the microphone in the normal voice. Please keep the
microphone about 3 or 4 cm far from your mouth.