User's Manual
Table Of Contents
- 1. Package-opened Inspection
- 2. Preparation
- 3. Radio Overview
- 4. Basic Operation
- 5. Programmable Key Function
- 6. Auxiliary functions
- 6.1 TOT Timer
- 6.2 battery saving
- 6.3 Low battery alarm
- 6.4 Number announcement
- 6.5 Quite Talk (QT) / Digital Quiet Talk (DQT)
- 6.6 Dual Tone Multi-Frequency (DTMF) Coding
- 6.7 Talkaround
- 6.8 Scan
- 6.8.1 Start/End Scan Function
- 6.8.2 Nuisance Delete
- 6.9 Transmission Begin and Transmission End Signals (PTT ID)
- 6.10 Lone worker
- 6.11 Emergency Alarm
- 7. Wired Clone Mode
- 8. Trouble Shooting Guide
- 9. Major Specifications
Page 15 of 22
5. Receive:
The radio will return to the receiving state after you loosen the PTT key. The distributor may have set
the CTCSS/DCS signaling in the programmed radio of your radio. On the channels with CTCS
S/DCS are set, you can only hear the call from other radio with the same CTCSS/DCS.
5. Programmable Key Function
Top key, side key 1, side key 2 can be programmed as one of the following functions.
Keys Function Description
0. None No function
1. Voice announcement
selector
Press this programmable key to switch between different languages and
modes of voice announcement and hear the number of channels being
broadcast.
2. Talkaround Switch the radio between talkaround and repeater mode.
3. Call Key 1 Sends the DTMF/2Tone code assigned to call 1 key.
4. Call Key 2 Sends the DTMF/2Tone code assigned to call 2 key.
5. Lone worker Enables Lone worker function
6. Emergency Alarm
Press the key programmed as “Emergency Alarm” to set alarm tone
according to the programming software or send your own ID or
background tone to your friend or the system.
7. Emergency Alarm Off Press this key to quit the Emergency Alarm mode.
8. Reverse play
Press this key programmed for “reverse play” to enter the working
mode of reverse play (optional)
9. Scan Start/end the scanning function of system.
10. Nuisance Delete Press this key Nuisance Delete when the car-mounted station eatables