User's Manual Part 1

2
1
22
transmit. After releasing PTT button indicator flashes orange
and then you can talk to other transceivers until the effective
time expires when the indicator turns dim.
7.10 KDC 1200
The dealer can activate or inactivate this
function by programming.
1) Receiving Signals:
When receiving the signal consisting of your ID and fleet code,
squelch will be activated, and call can be received and LED
flashes orange.
To manually deactivate the squelch, press monitor key or the
side button set as instantaneous monitor.
2) Transmitting Signals:
If the PTT ID or Call1/Call2 on the channel you
select has been set with KDC1200, KDC1200 signal will be
transmitted when making a call.
7.11 2-Tone
The dealer can activate or inactivate this
function by programming.
1) Receiving Signals:
When receiving proper 2-Tone, squelch will be activated, and
call can be received and LED flashes orange.
To manually deactivate the squelch, press monitor key or the
side button set as instantaneous monitor.
The dealer can program that squelch turns half active some
time after the signal disappears.
If auto Transpond has been set, the calling
transceiver will receive confirming signal.
If signal Call Alert has been set, it rings when receiving the
proper 2-Tone code.
2) Transmitting Signals:
If 2-Tone has been set on the channel you can transmit
2- Tone by pressing the side button CALL1 or
CALL2. The dealer can set it.
After transmitting the signal, indicator flashes orange and you
can talk to other transceivers until the effective time expires
when the indicator turns dim.
7.12 5-Tone
The dealer can activate or inactivate this
function by programming.
5 Tone has 7 coding formats: CCIR, ZVEI1, ZVEI2, DZVEI,
EEA, PZVEI, and EIA.
1) Receiving Signal
When receiving proper 5 tone signal, squelch will be activated,
and call can be received and LED lights orange.
To manually deactivate the squelch, press monitor key or the
side button set as instantaneous monitor.
The dealer can program that squelch turns half active some
time after the signal disappears.
If auto transpond has been set, the calling
transceiver will receive confirming signal.
If call alert has been set, it rings when receiving the proper 5
Tone signal.
2
1
22