User's Manual Part 2

2) The charger will stop charging and the indicator turns yellow
if the charger detects the battery is damaged
or if the temperature of the battery is too high (higher
than 50 for Ni-MH battery or 40 for Li-ion battery).
3) Do not charge the battery longer than the specified
time.
And do not charge the battery again if it is
charged fully, otherwise, its life will be
shortened or it will be damaged.
3.2 Installing the Antenna
Screw the antenna into
the connector at the top
of the transceiver by
holding the bottom of
the antenna and turn it
clockwise until secure.
3 Accessories
3.1 Installing/Removing the Battery Pack
To install the battery pack:
1) Match the 3 bulges
of the battery pac k
with the corresponding
holes at the rear bottom of the
transceiver;
2) Then firmly press the
battery pack downwards to
lock it in place until a click is
heard.
To remove the battery pack:
1) Use your thumb to press the
belt clip, and one side of your
index finger to press the
release button;
2) And then pull the battery
away from the transceiver.
3.3 Installing the Belt Clip
Match the grooves of the
belt clip with those on the rear of
the battery. Then press the belt
clip downwards to lock it in place.
3.4 Installing the Dust Cover over
the Versatile Connector
When not using the
optional Speaker/Microphone,
install the dust cover over
the versatile connector with the
supplied screw.