User's Manual

8
z USB cable
z User manual
2.3 MID Use and preparation
Battery Management and charging
Before using MID, please charge up the battery.
1. Use the AC adapter to charge up your MID battery.
This tablet adopt built-in lithium polymer battery, must be choose
standard adaptor for charging.
(Input: AC100~240V 50/60Hz 0.3A; Output: DC5.0V/1.5A).
2. The first two times charging please keep about 5 hours, after
that please charge for 4 hours at least.
Please charge in the following conditions:
A: The battery icons shows have no power.
B: The system automatically shut down, shut down after boot
soon.
C: Press operation buttons have no response.
D: The top right corner of the device shows red icons.
ǏRemarkǐ:
1. If you haven¶t use this tablet for a long time, in order to avoid
power consumption caused damage, please charge/play the
battery once a month.
2. After low battery shut down, connect DC adaptor, device will
remind low battery, charging, need to wait some time until the
battery is enough power to enter into main menu.
3. Device charging should be in standby status for each normal
charging time.
With device and screen consumption, it may cause longer
charging time.