User's Manual

Copy the document to storage card

1. Connect MID and computer together with USB cable.

2. After setting according to storage of MID, connect with computer successfully.

3. Open your computer, in my computer, examine content in “removable disk (x)”.

4. Find the document you want to copy, copy it to “removable disk(x)”.

5. After completion of copying, click “safely remove hardware” in taskbar of your

computer to unload.

Content of MID storage device

1. NAND FLASH storage device, space for MID to store document itself.

2. TF removable memory card.

3. The two above-mentioned storage devices both can be visited through connection with

your computer with USB.

Attention: when your MID is connected with USB cable, if you start up USB storage

device, you will cannot visit the memory card through MID, if you want to

visit memory card in MID, only disconnect USB cable.

2.12 Memory card

Copy the document to storage card

You can transmit document between MID and computer, such as music and picture, etc. If

you want to see documents in MID, only click the file browser to look through content in the

SD card.

Delete documents on the storage card of MID

1. Find document you want to delete.

2. Press the document name you need to delete, a file menu will pop up.

3. Click delete.

Removing storage card when the MID is in starting up state

If need to remove storage card under starting up state of MID, you must unload the storage

card firstly, for fear of failure or damage of the storage card.

1. In the homepage interface, press the menu key, then click setting.