User's Manual

User manual
Service Hotline：[phone]
909-829-koho
Introduction
Caution
Warnings and Cautions
FCC information
Location of Parts and Controls
Remote Control（options）
Projector installation place
Charging the Projector
Startup the projector
Video play
Play multimedia files by using file manager
Connect input source
WIFI connection
Browser
Connect with the computers
Troubleshooting
Specification
PICO PROJECTOR(P10)
User manual
Table of contents
01
02
03
07
09
10
10
11
12
13
13
14
16
17
Introduction
This product use TI 0.3 inch DMD chip, cooperate with
RGB LED display technology.
LED light source, using LED RGB trichromatic LED chips,
the life up to 20000 hours, in terms of 6 hours watching
TV every day, life is about 10 years, much higher than
general projector bulb lamp life 3000 hours.
Its brightness to 100 lumens, making the products in
the field of video, games, entertainment and mobile
commerce, have got well.
The projector with AV input interface, USB/micro SD
card input interface, Audio, Audio output interface,
with built-in speakers and infrared receiver control,
users only need to insert USB disk or micro SD card,
for the most part can decipher the format of the video.
The projector is with built-in smart Android system,
easily interpreted PPT, PDF, and other documents
instead of a computer
Support wireless Internet surfing, Various
Software and Game
When you buy the projector, please read the user
manual, it is the foundation of you are familiar with
and master and operate the projector, I wish you a
happy use!
KOHO TECHNOLOGY INC(USA)
ADD:12246 Colony Ave,Suite 300 China,CA 92710
Service Hotline [phone]-829-koho ：
E-mail:[e-mail]
Wed site：www.kohotech.com
02 03 04 05
CAUTION
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. THERE ARE NO SERVICEABLE
PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated "
dangerous voltage" within the unit's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the unit.
!
Avoid staring/facing directly into the
projector beam at all times
Important safety Instructions
All of the safety and operating instructions should be
read, adhered to and followed before
the unit is operated.
DANGER
To reduce the risk of electric shock, burns, fire or injury:
1.Do not use while bathing or in a shower.
2.Do not place or store unit where it can fall or be
pulled into a tub or sink.
3.Do not place in, drop or submerge in water or other
liquid.
4.Do not reach for unit that has fallen into water.
Unplug it immediately.
5.Care should be taken so that objects do not fall and
liquids are not spilled onto the unit.
WARNING
1. Close supervision is necessary when this appliance/
product is used by or near children or mentally
disabled individuals.
2. Use this unit only for its intended use as described
in this manual.
3. Unplug this unit during lightning storms or when
unused for long periods of time.
4. Never drop or insert an object into any opening.
5. Protect the adapter cord from being walked on or
pinched, particularly at plug outlets, convenience
receptacles and the point where it exits the unit.
6. Do not allow adapter cord to touch hot surfaces.
Wrap cord loosely around the unit when storing.
7. The unit should be situated away from direct sunlight
or heat sources such as radiators, electric heaters,
heat registers, stoves, or other units
(including amplifiers) that produce heat. Avoid
placing on top of stereo equipment that radiates heat.
8. Never block the air openings of the unit with
materials such as clothing, plastic bags or papers, or
place it on a soft surface such as a bed or couch,
where the air openings may be blocked.
9. Do not overload electrical outlet. Use only the power
source as indicated.
10. Do not carr y this unit by cord or use cord as handle.
11. Never operate this unit if it has a damaged cord or
plug, if it is not working properly, or if it has been
dropped or damaged, or dropped into water. If the
unit's power supply cord or plug is damaged, do
not attempt to fix it yourself.
12. To avoid the risk of electric shock , do not
disassemble or attempt to repair the unit. Incorrect
repair can cause risk of electric shock or injury to
persons when unit is used.
13. Do not operate in the presence of explosive and/or
flammable fumes.
14. Never remove the plug from the socket by pulling
the power cord.
15. Clean only with dry cloth.
16. Don't stick alcohol such as detergent to clean with
wet cloth lens
Warning
This Product Contains A Rechargeable Battery
• Do not store this product in high temperatures, damp
areas or in direct sunlight.
• Never disassemble the product.
• Never dispose of the product in fire or water, which
may result in explosion and/or injury.
• Keep product out of reach of children.
• Do not touch product with damp hands.
• Dispose of the product properly.
• The product must not be discarded with ordinar y
household waste.
• Contact your local recycling center for proper disposal.
Accessories
Standard Accessories：
Projector(1pc),USB cable(1pc),
Power Adapter(1pc),User manual(1pc),
AV cable(1pc),Flannelette bag(1pc)
Options accessory: air mouse (gyroscope),
air keyboard，Tripod，Remote control
FCC Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
1.Menu
2.Left, Right, Down, Up
3.Return to previous menu）
4.OK
5.Capacitive touch area
(In the area with a finger to
move the cursor, and then
double-click to confirm)
1.Tripod Dock hole
2.Intake port
3.Speaker
06 07
2) This device must accept any interference received
including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible
for compliance could void the user's authority
to operate the equipment.
This equipment has been tested and found to Note:
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This unit generates, uses, and can radiate
radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Location of Parts and Controls
Top
Bottom
Top view
Bottom view
1.DC IN 12V/1.5A
2.R RESET
3.AV IN /Audio out
4.USB OTG
5.USB HOST
6.Micro SD Card Slot
7.Project lamp
1.POWER ON/OFF
(Right push the switch to
show red color for open)
2.Outtake
3.Focus adjustment
Screen diagonal size Projection distance
40 inch,101.6cm 142cm, 55.9 inch
60 inch,152.4cm 213cm, 83.86 inch
80 inch,203.2cm 284cm, 111.8inch
100 inch,254cm 355cm,139.76 inch
AV input source
09 10 11 12 13
Front View & Rear View
Right view & Left view
Remote Control（options）
OK
Turn down the volume
Turn up the volume
Choose to confirm
MENU
Return to previous menu
N/A
Direction of the arrow, can
choose the required to
adjust the menu item
Tips:
Multiple use of capacitive touch area:
1. In main menu or picture viewing mode, double-click
the touch area and fast moving left or right to turn to
front or next page.
2. In browser or setting mode, double-click the touch
area and finger don’t leave touch area after the
second click, then slide upward or downward to view
more contents.
Replace the remote control
battery and battery safety
guidelines
1. Can only use Lithium, CR2025, 3.0 V battery, pay
attention to the above the right direction to install
batteries.
2. Used for the first time to protect the plastic of the
batter y removed.
3. Do not throw the battery into the fire or explosion
hazard.
4. If the batter y finished with or without the remote
control for a long time, please take out the battery to
prevent battery leakage damage the remote control.
Projector installation place
1.To install, after a vote of the geometry distortion in
image will not appear in trapezoidal state, the
projector should be placed in a horizontal position
(e.g., flat on the table), and perpendicular to the
center of the screen (90 ° right-angle direction).
2.The projector can display media just about anywhere!
However, for the best quality, we suggest you find a
light colored wall (preferably smooth and white) and
place the projector with its lens facing the location.
The projector can show media up to 120", just move
the projector towards and away from the wall to
adjust the size of the picture. Dimming room lights
will also add to viewing quality.
3. The distance between the projector and screen:
Charging the Projector
1. The projector is charged using the included AC
Adapter.
2. The LED Indicator Light will illuminate Red to indicate
that the projector is currently charging and then
revert to blue when the projector is fully charged.
It takes approximately 3 to 5 hours to fully Important:
charge the projector for the first use, and
the approximate working time is 2 hours.
3. A low battery icon will show on the screen when the
projector battery is low. Use the included AC Adapter
to charge your projector. If the battery is too low, the
projector will automatically shut off.
Start up the projector
1. Connect one end of the AC adapter to the Projector
12V port and plug the other end into an electrical
outlet.
2. Press the Power button to turn the projector on
3. When the picture is not clear, through focus
adjustment upon the gear make clear picture
You can also use the built-in battery inside machine
to start the projector directly
Video play (Play video in USB
and micro SD card)
1. Insert U disk or micro SD card into the projector
corresponding socket
2. Press the Power button to turn the projector on
Finger moves in the capacitive touch screen area,
move the cursor to the video icon , click the icon
to confirm
Play multimedia files
by using file manager
1. Finger moves in the capacitive touch screen area,
move the cursor to the “android” icon , move
the cursor to the“File manager” icon , click the
icon to confirm
2. Fingers to move the cursor to choose what you want
and broadcast
RM, RMVB, MPEG, MKV, AVI, Support the video format:
MP4, MOV, FLV, H.263, H.264,
3GP, DAT, VOB, TS, WMV ---
The maximum support 1920*1080P
MP3, WMA, MP2, AAC, M4A , Support the audio format:
MA4, FLAC, WAV ----
Adjusting volume: Long press the panel on the left,
right or volume switch to adjust the volume on the
remote control.
Adjust brightness
(1).Fingers move in the capacitive touch screen area,
click the icon to confirm
(2).Choose “Display“, “Brightness“, fingers drag the
cursor to adjust the brightness,
Enter “OK “ to confirm。
15
Specification
Native Resolution:
Display technology
LED brightness:
LED Lamp Life
Image Size
Color Gamut(typical)
Projection offset
Contrast ratio(FOFO)
Screen Aspect Ratio
Uniformity
Throw ratio
Speaker
Power
Battery Life
DC IN
UNIT Dimension
854 x 480 (WVGA)
The maximum resolution support 1080P
0.3’’DMD,TI DLP
100 ANSI Lumens
Approximately 20000 hours
120 inch
100% of NTSC
100% offset
1000:1
16:9
85%
1.6:1
2x1W Speakers
7.4V 2000MAH Rechargeable Battery
2 Hours (Fully Charged)
12V/1.5A
100x99x27mm
17
1. The projector off, Connect the AV cable (included) to
the AV port and the other end to your device.
2. Press direction key, Select the AV in icon , press
SELECT knob, followed by AV in
Browser
Enter into homepage
The browser always habitually shows the last homepage
visited by user, the homepage will appear when it enters
into the browser on boot.
Change your home page
1. Finger moves in the capacitive touch screen area,
Click browser icon .
2. Press the icon , menu of browser settings pops up.
3. Click Settings.
4. Click settings home page.
Input website, and click "OK". enters
into the browser on boot.
14
Find the words in webpage
1. When browsing the web, press menu button and
menu options pop up.
2. Click more.
3. Click a homepage you want to visit.
4. Enter your search projects.
5. When you input characters, words will change from
white to green.
6. Click the arrow on search column to move on
searching.
Connect with the computers
1. Connect OTG interface of projector with computer
by USB cable
2. According to the tips on the screen , do the
corresponding operations you want
Trouble shooting
Q. The Projector cannot show the video on the wall.
A. Recharge your device's battery. Also, check to see if
the HDMI cable is fully inserted into the Projector
and your device.
Q. The video showing on my wall is blurry.
A. Adjust the Focus Wheel on the Projector to fine-tune
the picture. It may also depend on the surface on
which you are attempting to show your video. Try
moving to a location with a smoother wall surface.
Q. I cannot get my device to work at all with the
projector and its battery is fully charged.
A. Make sure the cables are inserted into the correct
ports and test connections.
Q. No signal - I am getting no input from my device.
A. Make sure your device is on - and fully charged.
Q .The system is abnormal.
A. Installing the 3rd party program may cause in failure
operation, press RESET (near power connector) to
reset the system.
16
01
08
You can connect projector to WIFI network:
1. In the homepage interface, click the settings button
2. Click wireless and network.
3. Drag WIFI to “ON”. Projector will automatically
scan available WIFI networks.
4. Choose the WIFI network you prefer. If it is private
WIFI network, then the password having been set
should be input.
WIFI connection
05
11
15