User's Manual

- 72 -
− Cancel All: Cancel the call barring. The network barring password
provided by the network operator is required to cancel call barring.
− Change Barring Password: You can modify the barring password
with this function. Enter the original barring password when
modifying.
Line Switching:
− Switch to Line 1 or Line 2, the default is Line 1.
Note: If you select Line 2, then making calls from Line 2
depends on the network operator.
Call Time Reminder:
The function prompts you to end the call to save the call cost. The
prompt options are "Off", "Single" or "Periodic"; There will be no
prompts when the Call Time Reminder is set to OFF. You are required to
enter a specific time value in the range of 1 and 3,000 seconds When
set to “Single”, the phone will automatically ring once. You are required
to select a numerical value between 30 and 60 seconds when setting
the prompt to “Periodic”, and the phone will automatically ring once at
your chosen time before the completion of every full minute.
Call Time Display:
You can Activate or Deactivate the Call Time Display function. When set
to ON, the talk time will be displayed on the screen during the call. No
call time will be displayed when this function is set to OFF.
Auto Redial:
You can Activate or Deactivate the Auto Redial function. When set to
ON, the phone will automatically redial the last called number after a
while if you fail to connect to the number. Auto Redial can be done up to
10 times, and you cannot make any other call when the Auto Redial is
in progress.
To end Auto Redial, press cancel.