User's Manual

34
Shortcuts: You can set shortcuts for those functions you often use.
Dedicated key: You can configure short cut functions for the Up, Down,
Left and Right key respectively. In the standby mode, press any one of
them to access the appointed function.
Auto update of date and time: It can be set to ON or OFF.
Flight mode: You can set the normal mode, flight mode and Query
When Power On.
Handwriting: You can set the pen speed and the color as your desire.
Display Characteristic
With this function you can configure the basic status of display
characteristics including wallpaper, LCD backlight, screen saver, power
on display, power off display and so on.
Network Setup
Please contact the network operator for the following network service.
1. Network Selection
You can choose Automatic or Manual to select the network (Auto is
recommended). When you select Automatic, the phone will make the
preferential selection according to the network where the SIM card
belongs. When you select Manual, you are required to select the same
network as the registered network with the network operator by SIM
card for your use.
2. Preferred Networks
Select the Preferred Networks. The default network is the network
where the SIM card belongs. Select Options to perform the following
operations:
 Add From List: Display all PLMN list.
 Create New: Create a new network and set the network priority.
 Change Priority: Reset the selected Network Priority.
 Delete: Delete the current preferred network.
3. GPRS Connection
You can set it when needed or Always to GPRS connection.
35
Security Setup
 SIM Lock:
It is asked to input the PIN. It can be configured if the PIN is correct. If
SIM card is set on, it needs to input the PIN every time you power on.
Three times wrong PIN input, it's asked to input PUK. PUK is used to
release and modify the locked PIN. If PUK isn't provided or missed,
please consult your network operator.
 Phone Lock:
You can lock or unlock the phone. Enter the password to activate or
deactivate the phone lock. When the phone is locked, you will be
required to enter the phone password. 4-8 numbers can be used for the
phone password. The default phone password is 1234.
 Auto Keypad Lock:
You can lock/unlock the phone keyboard and set the Key Lock Time
to 5 seconds, 30 seconds.
 Fixed Dial:
If this function is enabled, only phone numbers in the Fixed Dial List can
be dialed. PIN2 is required for this function. Network support is also
required.
Note: If you enter PIN2 after the phone is switched on, PIN2 is not
required before the phone is switched off. Therefore, please switch the
phone off and switch it on again after configuration, if you do not want
others to change the status of the Fixed Dial.
 Barred Dial:
If this function is activated, the phone numbers in the barred dial list
cannot be dialed. PIN2 is required for the function. Network support is
also required.
 Change Password:
You can change PIN, PIN2, and phone lock password.
1> PIN
− The original PIN is required before change the PIN.
− Enter the new PIN. 4-8 numbers can be used for PIN.