User's Manual

40
IMPORTANT INFORMATION
Use of Passwords
Your mobile phone and SIM card have various passwords. Those
passwords avoid unauthorized use of your phone and SIM card. You
can change PIN, PIN2 and phone password in the “Settings > Security
Settings > Change Password”.
Phone Code
The Phone code can be used to avoid unauthorized use of your phone.
The factory setting for the phone code is 1234. If phone lock is enabled,
you will be asked to input the phone password when you switch on your
phone.
PIN (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card
unauthorized use. The PIN code is usually supplied with the SIM card.
When the PIN code request is enabled, the password is asked every
time the phone is turned on.
Three times wrong PIN input, the SIM card will be locked and you will
need to use the PUK to unlock it. PUK is usually set by the network
operator.
1. Enter the correct PUK to unlock the SIM card, and then enter the
new PIN and press OK.
2. If you are prompted to enter the new PIN again, enter it and press
OK.
3. If the PUK is correct, the SIM card will be unlocked and the PIN will
be reset.
PUK (8 digits)
The PUK (Personal Unblocking Key) code is required to change a
blocked PIN code. Please contact your network operator for the code.
Note: Ten times wrong input in succession, the SIM card will be invalid
and you need to consult with your network operator for a new SIM card.
41
PIN2 (4 to 8 digits)
The PIN2 code, supplied with some SIM card, is used for some
functions, such as Call Cost, Fixed Dial and so on. Please consult your
network operator to confirm whether your SIM card supports those
services or not.
Three times wrong PIN2 code input, the SIM card will be locked and
you will need to use the PUK2 to unlock it.
1. Enter the correct PUK2 to unlock PIN2, and then enter the new PIN2
and press OK.
2. If you are prompted to enter the new PIN2 again, enter it and press
OK.
PUK2 (8 digits)
The PUK2 code, supplied with some SIM card, is required to change a
blocked PIN2 code. It may be supplied with the SIM card. If not, contact
your network operator.
Note: Ten times wrong input in succession, the SIM card will be invalid
and you need to consult with your network operator for a new SIM card.
Barring Code
To activate call barring, you need a Barring Code. You obtain the
password from your service provider.
Battery Information
Charing and Discharging
 The charger is designed to be used in temperatures between0°C to
40°C.
 Do not charge the phone in wet and damp conditions.
 Use only batteries approved by the phone manufacturer and
recharge your battery only with the charges approved by the
manufacturer.
 We strive to produce products in compliance with global
environmental standards