User's Manual

1> Activate: The mobile phone will connect to the network when Call Wait is

enabled. After a while, the network will take a response by sending

messages to ensure your operation. If Call Wait is enabled, the network will

warn you. At the same time, another coming call number will display on the

screen when the first call is ongoing and a new call is coming.

2> Deactivate: If you cancel Call Waiting, the network won't warn you when the

first call is ongoing and a new call is coming.

3> Query Status: With this function, you can inquire about the current status

from the network.

 Call Divert: This function allows your phone divert coming calls to another phone.

In Settings, select Call Setup > Call Divert:

1> Divert All Voice Calls: When this function is enabled, all coming calls will

be diverted to another phone. Set it On or Off, the phone will connect to the

network. After a while, the network will take a response and tell you the

result on operation.

2> Divert If Unreachable: When this function is enabled, the coming call will

be diverted to another phone number if the phone is unreachable.

3> Divert If No Answer: When this function is enabled, the coming call will be

diverted to another phone number if there is no answer in some time.

4> Divert If Busy: When this function is enabled, the coming call will be

diverted to another phone number if the phone number you dialed is busing.

5> Divert All Data Calls: You can divert all data calls with the need of your

network operator's support.

Note: Five operations described as above:

 Activate: Activate it after input the diverting number.

 Deactivate: Cancel the function.

 Query Status: Used to inquire about the current status for some

diverting function from the network. The phone will connect to the

network. After a while, the network will take a response and tell you

the result.

6> Cancel All Divert: Use to cancel all diverting functions.

 Call Barring:

This function makes use of Call Barring to limit some selected calls. When you

configure this function, you should consult your network operator for the password. If

the password is wrong, the phone will prompt the fault message. After the desired

number is selected, please continue to select On or Off. After a while, the network will

take a response and tell you the result.