User's Manual

How to Input Special Symbols
If you want to input special symbols, such as ". ! ? = < >”, Etc., please following steps
as below:
Press the left soft key to access Menu for the Insert Symbols in the Entry method or
press the * key to display the symbols. Press the Up/Down, or Left/Right Key to move
the cursor in the symbol table, and select one symbol. Press the right soft key to cancel
the symbols selection.
Appendix B: Troubleshooting
This section lists some problems that you might meet while using your phone. If you
feel that your phone do not operate normally, please reset settings first, and then follow
Troubleshooting Guide. If you are still unable to solve problems, please contact the
authorized service center or the store from where you purchased the phone.
Problems Solutions
Can not
answer or
make a call
Make sure that the phone has been switched on.
Make sure that the battery is charged.
Make sure that the signal intensity is high enough.
Make sure the own number function in the call setting is system
preset or number sending.
Make sure the line switch in call setting is the system preset line.
Check whether you have set up call barring or fixed dialing or
any other safety function.
Check whether you have set up call diverts. Check whether you
have inserted the proper SIM card correctly.
Low voice Check if the volume has been set too low.
No ring
Check whether you have set up the” Vibrating Only” option.
Check whether the ring volume is not too low
Move away from a noisy place to check if you can hear the
phone ringing.
Check whether you have set up call diverts.
LCD
unclear
Check whether the contrast has been set too low.
40