User's Manual

700P11A Ёᗻ㣅 ᭛䇈 ᯢк(ᑇ ᵓ⬉㛥 Rk2906 ᮍḜ)
System Settings
Here you can configure the wireless network, change
the system time, set the input method, and the like.
ƿSet the Wi-Fi Network
1. Tap Settings in the application list.
2. Tap the Wi-Fi switch to enable the Wi-Fi function. tap
Scan at the upper right corner of the screen to search the
Wi-Fi network. When the searching is finished, please tap
the target network. If the target Wi-Fi network is
encrypted, the icon will appear at the lower right side
of the signal strength icon.
3. Tap the password box to input the connection
password. If you use DHCP on your router, just tap
Connect to complete the network connection after
inputting the password. If your router has no DHCP or
does not support DHCP, please follow the steps below to
complete the network connection.
25