Pepkoo® Magnetic Wireless Charger User Manual Pepkoo are registered trademarks of Shenzhen Lanbo Technology Co., Ltd Copyright©️Shenzhen Lanbo Technology Co.,Ltd. All right reserved WWW.PEPKOO.
Specifications Model:CK60 Input:12V(compatible 9V/5V) Output:7.5W/10W/5W Frequency:110-205kHz Charging Range:4~6mm Conversion:75%~84%(max) Compatible: iPhone X/8/8plus/Samsung S/Note Series Protection: POD,OT,OV,OC,OVP,DPL,FOD Adapter: QC3.0(12V) /Compatible with QC2.0(9V)/Normal 5V Package Inclues 1. Wireless Charger Pad x 1 2. USB Charging Cable x 1 Attention: Power Adapter is not included. We recommend QC3.0(12V) enabled power adapter for fast charging.
Basic Operation ⚫ Charging Status Indicators Status Indicators: Red/Blue(Green) LEDs 1. 2. 3. 4. 5. is Power On: The Red and Blue (Green) LEDs are on. Stand By: The Red LED is on. Charging: The Blue(Green) LED is on. Error: The Red LED is flash. Full: The Blue(Green) LED is off and the Red LED on. Use Instructions • Adapters: 1. For iPhone User: Please use QC3.0(12V) adapter 2. For Samsung User: Please use QC3.0(12V) or QC 2.0(9V) adapter 3.
FAQ&Warnings Faults Solutions 1. Incorrect connection Indicators aren't working 2. Loose connection of charging cable 3. Damage of the charging cable or adapter 4. Others 1. Can the devices support wireless charging? The devices cannot be charged by the wireless charger 2. Place the devices on the wireless charger correctly. 3. Metal protective case. 4. Fault of the wireless charger. Please contact local distributor.
FCC statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.