User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
18 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
Attention：When embedded the 6.5inch display screen into the metal frame, it shall be stably installed
and leveled to ensure that the screen and metal frame are on the same horizontal level
■Replace RFID Card Reader
1. Unplug the USB port from the card reader before removing it.
2. Loosen and remove the M4 stainless steel flange nuts with the hexagon socket (0.28inch), and
remove the transparent acrylic mounting plate and card reader together (as shown in picture below)
■Replace the Barcode Scanner
1. Close the Windows system in the touch screen interface first, then open the kiosk back door to turn off
the main power switch.
2. Unplug the USB cable of barcode scanner fromthe computer.
3. Loosen and remove the 4 M4 stainless steel flange nuts on the scanner mounting bracket with an
inner hexagon soft sleeve (size 0.28inch), remove the scanner and mounting bracket together, then remove
the 4 M3 stainless steel combination screws on the back of the scanner with a cross screwdriver to separate
the scanner and mounting bracket (as shown in below picture)