User's Manual

3、Product Bluetooth binding and unbinding
3.1、Download the "ilife+" app on your mobile phone, enter the home page of the app
device, click Add Device, and the app enters the scan device status.
3.2、The Pokki smart pill box presses the physical button for more than 3S, the blue light
of the Pokki smart pill box flashes quickly, and the pill box enters the Bluetooth pairing
state.
3.3、The app clicks on the corresponding Pokki smart pill box to bind.
3.4、After the app is successfully bound with the Pokki Smart Pill Box, the blue light of the
Pokki Smart Pill Box will always be on for 3S and the buzzer will emit a beep.
3.5、Untie the pill box and app
3.5.1：Pill box long press the physical button, the pill box can be unbound with the
app.
3.5.2：In the app device page, click on the device to unbind, and the pill box can be
unbound from the app.
4、Product use introduction
4.1
、
Put the CR2032 button battery into the battery holder and insert it into the Pokki
smart pill box. When the Pokki smart pill box is powered on, the buzzer emits a beep and
the blue LED flashes once.
4.2
、
After the pill box is powered on, there is no button operation or app binding
operation within 20S, the smart pill box enters the sleep state (ultra-low power
consumption), short press the physical button, the pill box buzzer emits a "beep" prompt
sound and the LED blue The light flashes once and the pill box is awake.
4.3
、
When the pill box is in the awake state, short press the physical button to view the
power prompt of the pill box; long press the physical button to enter the Bluetooth
pairing state, and the blue light flashes 20 times. The blue light ends flashing, and the pill
box exits the Bluetooth pairing state.
4.4
、
When the pill box is in the bound state, the pill box is in a low power consumption