User's Manual

Page 3 of 4
IV. Operation illustration
1. This product is 2.4GHz wireless camera, it is wireless remote which can move atomically, move horizontally
and vertically, and let you use it more easily.
2. This product should be used with the RC822A.
3. Please use the right power adapter; you should tighten the antenna before connecting the power. When it
connects to the power, the red indicator light will be bright.
4. The camera can move from up and down, or from left and right to check itself, at last, the camera will stop on
the middle position.
5. Through the control of RC822A, the lens move horizontally or vertically, when it move to the back, it will
alarm.
6. This product can’t be used in the environment that has reinforced electromagnetic.
V. Solution for problem during usage
1. If the picture is not stable or you can’t receive the picture.
a. Please check whether the powers for the camera and receiver are on.
b. Whether the distance between the camera and receiver is very far, or there are many obstructors(such as
buildings of steel structures, it will affect transmitting signal seriously) between them.
c. Whether the camera frequency is corresponding to the receiver frequency, (the same frequency transmitter
can not work at the same time in the effective receiving scope, they will interfere each other easily, result
in poor picture quality.)
d. Antenna should be far away from electromagnetic shielding obstructors, such as copper, iron and so on.
e. If there is a high power signal with the same frequency and a car radio receiver which is working, it will
interfere the receiver.
Ⅵ. Accessories
z DC 12V/1A power adapter 1PCS
z Manual 1PCS
z Warranty card 1PCS