User's Manual

ManualsBrandsShenzhen Lian Yi Da Science ManualsCamera & PhotoWIRELESS CAMERA

CM388CWAS Wireless Camera User Manual

Thank you for choosing this wireless camera, please read this manual carefully before you use

it, it will benefit you to use it better.

1. Introduction

CM388CWAS wireless camera uses ISM wave band which can transfer audio and video signal

in the frequency scope of 2400～2483MHz, it can be used in baby monitoring、patient custody、

security, surveillance, etc.

2. Basic Specifications

● Image sensor: 1/3 color CMOS sensor

●Support NTSC or PAL video system

●Display Size: NTSC: 510×496 PAL: 628×586

●Pixel Size: 9.2um×7.2um

●Video output: can be used as wired and also wireless

●Wireless frequency : 2.4GHz, 2.427GHz, 2.454GHz, 2.481GHz

●Audio modulation frequency: 6.0MHz

●Open transmission distance: 100m

●Rotating angle：electric rotating 270 degrees from left to right

rotating 90 degrees up and down by hand

●Size: ￠65x95mm

●Wight: 0.15kg

3. The entire sketch map

4. Installation

4.1. It is more convenient for you to see the stable environment when you install the

remote sense

window

power socket

POWER Exchange Key

Channel switch

AV output

Lens

Infrared

light

90 degree rotation

270 degree Rotation

Summary of content (4 pages)

PAGE 1
CM388CWAS Wireless Camera User Manual Thank you for choosing this wireless camera, please read this manual carefully before you use it, it will benefit you to use it better. 1. Introduction CM388CWAS wireless camera uses ISM wave band which can transfer audio and video signal in the frequency scope of 2400～2483MHz, it can be used in baby monitoring、patient custody、 security, surveillance, etc. 2.
PAGE 2
CM388CWAS in a fixed position, or install it on the other places such as the desk、baby bed nearby and so on. 4.2. Please install CM388CWAS in a better-lightened place, so you can get the clear picture. 4.3. Please install CM388CWAS in an open place, so the transferring distance will be farther. z Please don’t install CM388CWAS in such places that have many metal objects or have many obstructions between receiver, it will affect the transferring distance.
PAGE 3
④ The speed change 4 mode: transfer about 20 circles/minute, the blue indicator light will be lightened one time per 0.2S. 3). Power off: Under “power on” mode, press the key for 3 seconds, the power will be off. 5.6. The key illumination of remote control Power key: Under “off” mode, press the switch key to open the camera, the power indicator light (LED1) will be on. Press the switch key again, it will be off.
PAGE 4
each other easily, result in poor picture quality.) d. Antenna should be far away from electromagnetic shielding obstructions, such as copper, iron and so on. e. If there is a high-power signal with the same frequency and a car radio receiver which is working, it will interfere the receiver. 7. Accessories z DC5V/1.