Installation Guide

Ņ.Product specification
Sensor CMOS sensor
Lens HD Lens
LCD 3 inch OLED display
MIC/Speaker
Built-in
Photo JPG format
Video AVI format
Audio Built-in microphone/speaker(AAC, MP3)
storage SD card (max to 64G)
Flash Electronic shutter
Car charger
5V/1.5A
Working
temperature
-10ć-50ć˄suggested˅
Working
humidity
10%-70%RH
Battery 400mAh 3.7V
Note: Product parameters may be changed due to product upgrades, updates, etc.,
subject to the actual products.
ņ. Simple troubleshooting
ķ: The machine shows that the memory card is full and cannot be loop recording.
1.The machine will reminder you to format the SD card when the new card is used
for the first time on the machine. Even thought there is no reminder, please format
SD card first and then use it.
2.Check the recording duration/loop recording settings: there are options 1
minute/2 minutes/5 minutes/off. If you select the Off option, the machine cannot
carry out loop recording.
3.Check if G-sensor is set to high, If so, the car will jolt and shake the machine