Installation Guide

during the driving process, which will cause the file to be locked. The locked file
cannot be overwritten and if there are too many locked files accumulate, the SD
card will be full and stop loop recording.
ĸ: Power on/off automatically:
Please check if the parking mode is turned on. If so, the machine will
automatically turn on and record when it detects a collision or a shaking, and
automatically shut down after the recording time is due (depending on the
recording time setting).
Ĺ: The rear camera cannot show videos and images
1.Please check if the AV plug is connected correctly and whether the camera is
plugged in.
2.Check if the machine setting item is off, the default is open, and confirm
whether it is set to display only the front lens.
ĺ:Video stutter or button lag during recording
Please check whether the SD card is a high-speed card (class10). If not, you may
have problems such as missing seconds, video playback stutter, screen mess, and
crash. (Because the quality of high-speed cards is uneven in the market, you
should purchase branded SD card).
Ļ: Do not save the settings
1.After finishing settings, you must manually press the shutdown button, then the
settings will be saved.
2.When abnormal electricity blackout happens, the settings are too late to save the
current data.
ļ:When you change to reverse gear, the rear cam will have some problems on the
display like strip interference, black video, screen mess.
1.Please check if the cable of the camera is connected correctly. Correct
connection: the red cable is connected to the positive pole of the vehicle, the black
cable is the test one, do not need to connect! (Note: the rear cam only be
connected to 12V, and can not be connected to 24V truck ones, otherwise the
machine will be burned).