User's Manual

- 8 -
4. Insert the car charger into the car cigarette lighter, and please
use the standard 1.5A car charger.
5.Install the rear camera on the rear of the vehicle and pay
attention to the direction of the camera when installing. Pave the
cable alongside the roof of the vehicle. After the installation is
completed, put the rear plug into the rear camera interface of
the dash cam, and connect the red reverse cable of the rear
camera to the positive pole of the reverse lamp.
6. Connect the dash cam USB interface to the car charger with
a charging extension cable.
【Attention】Pave the cable alongside the edge of windshield.
7. Adjust the lens position to ensure that the lens are level with
the ground.
8. Start the engine and check whether the machine is installed
correctly.
3.Product Precautions
1.Before installation, please check the accessories carefully to
ensure that the products and accessories are correct and
complete, and then start the installation.
2.During installation, be sure not to insert the car key into the