Users Manual

Using Your DashCam
As a driver, you have full responsibility to drive safely and adhere to all applicable traffic regulations.
Connecting To Power
①Connect the car charger and DashCam by using the charging cable.
②Plug the other end of the car charger to your vehicle's cigarette lighter socket.
③Once the car engine is started, DashCam will automatically power on and start recording. Once the car
engine is shutdown, DashCam automatically saves the recording and turns off within 5 seconds.
Manually turn on/off
①To manually turn on, press the power button.
②To manually turn off, press and hold the power button for at least 2 seconds.
3 Mode (/Recording/Photo/Playback) Setting
Video Setting
After power on enter the video mode, Long-press M button once to switch to the video setting
the video icon will be shown on the LCD top right corner
Resolution
2880x2160 P24 1920x1080 P60 1920x1080 P30
1280x720 P120 1280x720 P60 1280x720 P30
FHD P30+VGA P30
Loop recording
off/3 min/5 min/10 min
Time Lapse Video
Off/200ms/500ms/1second/2second
WDR
On/off
EV exposure
"+2.0","+1.7","+1.3","+1.0","+0.7","+0.3","0.0"
"-0.3","-0.7","-1.0","-1.3","-1.7","-2.0"（Default value 0.0）
Motion detection
on/off, default off
Parking Mode
on/off, default off
Record Audio
on/off ,default on
Date Stamp
on/off ,default on
GPS Stamp
on/off ,default on
G-sensor
Off/High/Medium/Low, default medium
Speed Unit
KMH/ MPH, default KM/H
Photo Setting
After power on enter the video mode, Long-press M button twice to switch to the video setting
the photo icon will be shown on the LCD top right corner
Capture Mode
Single/2s Timer/5s Timer /10s Timer, default Single