Users Manual

it won’t be deleted by loop cycle function.
Parking Monitoring — On/ Off(Default)
Designed to work when dash-cam is shaken during HIT&RUN event while your car is parked. Based on G-sensor setting, when your car gets
hit and shacked, the dash-cam will turn on automatically, and start recording for 1min on internal battery, then lock that video file before
automatically turn-off, so the video file won’t erased by loop recording function.While you use the dash-cam and the car is running, please
turn OFF this function, otherwise the dash-cam will automatically turn on and off randomly.
Please note: The internal battery can provide power up to 2-3mins when it is fully charged. If you want 24h monitoring, please use a hardwire
kit to connect the dash-cam to your car battery(hardwire kit not included in the package).
Language — Multilingual, default English.
Allow to choose your desired language for dash-cam system.
Volume — Off/ High(Default)/ Middle/ Low
To switch on/ off or adjust the beep sound.
Screen-saver — Off(Default)/1min/ 2mins/ 3mins
Once chose a time duration and turned on this function, the dash-cam will automatically show a black background after the set time, while
the camera still stays ON. Please notice that this function only turns off the LCD screen, to prevent from distracting the driver. By press the
power button or tap on the screen, the dash-cam will exit this mode and you could operate it.
Frequency — 50HZ/ 60HZ(Default)
According to the power supply specification used in your country.
50HZ-Used in USA, North America
60HZ-Used in Europe, most Asian Countries.
Date/Time
Set your local date and time.
Date/Time Stamp — On(Default)/Off
On:The recording time will be shown on the video or photo.
Fitigue Warn — Off(Default)/1 hour/2hours/4hours
1/2/4Hour(s):The dashcam will make sound when dashcam working for 1/2/4 hours.To alert that please keep awake.
Format SD Warn — Off/15days/30days(Default)/60days
15/30/60 day(s):The dashcam will alert that please format SD card, if too much emergency lock file to use loop recording function.
Format SD Card — OK/Cancel
Allow to format the inserted memory card, all data will be deleted.
Default Settings
Allow to restore all settings to factory default settings
Firmware Version
To check the current firmware in the dash-cam. You’ll need this necessary information to check if newer version firmware is available to
update. Please visit http://www.azdome.hk/downloads.html for the latest firmware.