Warranty

1. MODE (VIDEO/PHOTO/PLAYBACK) SETTING
Resolution
Allow to choose the desired video resolution. Higher resolution videos result in smoother videos, but also take more
storage space.
Loop Recording — Off/ 1min/ 3mins(Default)/ 5mins
On: Here select the length(1/3/5 min) of each video clip for the loop recording. This function allows the dash cam to
continuously record. Please notice: the dash cam will keep deleting the oldest files automatically when memory card gets
full so that it can keep recording over and over.
Off: The dash cam will a long video until the card is full then stop to record.
Backup Cam Mirror — Off(Default)/ On
This feature works only on the rear camera image.
On：The image of the rear camera is as same as in the rear mirror, what on the left in reality -> on the right of the dash cam screen;
Off：The rear camera image is as same as what you see, what on the left in reality -> on the left of the dash cam screen."
WDR — On/ Off(Default)
Wide Dynamic Range (WDR) processes images to ensure clear recordings in bright and dark light. This allows the Dash Cam to
combine multiple images at different levels of brightness to create one superior image.
Parking Mode — On/ Off(Default)
If connected to cigarette lighter to supply power, with "Parking Monitor" function enabled, dash cam automatically starts
recording a video for around 60s and lock it when any collision/impact detected.Dash cam use its internal battery(500mAh)
to detect any knock or bump so supports limited times of recording a 60-second video. This mode greatly saves energy and
protects your car battery.
If you want to use 24-hours Parking Monitor please take refer to Page EN-14
Time Lapse Parking Mode — On/Off(Default)
This menu will be shown when ONLY connected to 3-lead hardwire kit.
Time Lapse Parking Mode ON: Dash cam will capture photos at 1 frame per 1s, and stitches them into a video which