Warranty

2.Please copy the firmware file named FW96670A.bin to the Micro-SD card and insert Micro SD Card into dash cam.
-DO NOT create any new folder on the Micro-SD card to save the firmware file. Simply copy and paste the file directly to the
Micro-SD card.
-DO NOT change the firware file name. Otherwise, the camera will NOT recognize the firmware update.
3.Connect to power supply and press power button to power on the dash cam, then the dash cam screen will stay black and the first
Blue light will blink rapidly for about 30-40 seconds. The dash cam will power on again when the firmware updating complete
successfully.
4. Go to dash cam System Setting and select “Version” to check if the firmware version is the latest version.
5. MUST format the Micro SD Card in dash cam, otherwise the dash cam will update again when next power on.
Any problems please contact us [e-mail]
5. READING DASHCAM FILES
1.Please remove the Micro SD card from camera and insert it directly in your laptop if you have a Micro SD Card slot (otherwise
please using a Micro SD Card reader).
2.You should be able to see drive "D" or "E" or other name depending on the pre-installed hard drives.Once you find the added flash
drive, double click in it, then you will see the M63- Movie / LOCK / Photo
Movie：The loop recording video files that can be overwritten.
LOCK：The video file will be locked so it will NOT be deleted by loop recording function.
3. Then simply double click on the video to play them.
File named *********A=videos or photo captured by front camera
File named *********B=videos or photo captured by rear camera
6. FAQ
Q：Camera does not turn ON
1.Use the different USB Cable & your smart phone’s USB charger. Now plug it into your home’s 110V wall outlet.
2.When you plug it in, the camera should turn ON. If NOT, then press the Power Button Once to see if it turns ON? If it still does NOT
turn ON, then remove the memory card.
3.Keep the camera plugged in. Now Press the RESET button (Located at the top) ONCE with a pen’s tip or a paper clip. Now the
camera should turn ON. If it still doesn’t turn ON, then please CONTACT US.
Q：Camera showing "Memory Error" or "Please Insert Micro SD Card" even though Micro SD card is already installed into the
camera.
Please make sure Micro SD card is at least Class 10, U3 and purchased from trusted vendor such as Walmart, target, best buy, Ship
& Sold by Amazon" etc.