User Instructions
Please read the instructions before use: ●We reserve the right to modify the contents of this notice without prior notice. Depending on normal conditions, certain functions may vary in specific software versions. ●This product should be charged for at least 2 hours before use, but avoid charging in an unoccupied environment for a long time when charging. ●Please connect the magnetic charging cable to the charging port of the smart watch automatically.
After installing the APP, please follow the interface prompts to register and login, you need to turn on Bluetooth. In the device interface, select the Bluetooth name LW51 to bind and the watch can be used normally.
Information Once the watch is connected to the mobile app, new pop-up messages on the phone are pushed to the watch side simultaneously. The watch stores several messages. Dialing After connecting the app, please pair the watch Bluetooth with your mobile phone. Bluetooth shows connected status, you can make calls from the watch.
Language assistant Once the watch is connected to the mobile app, the language assistant function can be used directly. Alarm clock Find the alarm function in the list and add an alarm according to the appropriate settings. Weather The weather is automatically synced to the watch when it is connected to the mobile app. Frequently used contacts Once the watch is connected to the mobile app, find your frequently used contacts in the settings and add them as required.
Blood Oxygen Monitoring Blood oxygen measurement: the red light at the bottom lights up to start the measurement, which is completed after approximately 30 to 60 seconds. The measurements at this point are based on the PPG technique measurements. Sleep Monitoring Shows the day's sleep monitoring status, data is updated daily and specific data can be synced to the APP for viewing.
Breathing exercises Choose the appropriate time to inhale and exhale according to the interface to achieve the exercise. Women's Health Once the watch is connected mobile app, you need to set as female in the app, and the indicate the corresponding s according to the body health setting.
Dial switching The watch has several built-in dials that can be switched with a long press and supports push dials (there is also a large selection of dials available in the app). Timer When the appropriate tim selected, the timer is activ timer will end the vibratio Switch the device Press and hold theStopwatch button for 3 timing: seconds to switch Stopwatch on. The watch will click on the triangle to start, click again to pause, turn on automatically when the pause, click on the left charging.
Restoring the factory Confirm that restoring the factory will delete all personal data. Product parameters Please read this manual first to ensure safe and correct use ● The data from this product is System Information for health management View the watch's name, Mac reference only.Bluetooth Please do address, firmware versiondata. number not use it as medical If and other information. abnormal body data is found, hospital examination shall prevail.
● This watch is water resistant to IP68. You can use it normally in daily life, such as washing your hands, in the rain, etc. Please do not place the watch in hot water, do not perform operations such as pressing underwater or deep diving, and do not expose the watch to corrosive liquids to prevent damage to the watch. Water resistance rating. IP68 Sensor. 3-axis G-sensor Synchronisation method. Bluetooth Resolution: 240*240 Display screen: 1.28 inch TFT Working time: approx.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
