Instruction Manual
Please read the instructions before use: ●The company reserves the right to modify the content of this notice without notice. According to normal circumstances, some functions are different in specific software versions. ●The product should be charged for more than 2 hours before use, but avoid prolonged charging in an unmanned environment when charging. ●Please attach the magnetic charging cable to the charging port of the bracelet automatically.
Method of operation ●On the dial interface, swipe from top to bottom to enter the shortcut interface ●In the dial interface, swipe from bottom to top to enter the information list interface ●On the dial interface, swipe from left to right to enter the menu style ●On the dial interface, swipe from right to left to enter the steps, heart rate, weather, camera and other interfaces Exercise data Swipe the touch screen from right to left to enter the exercise data interface to view the day's data: steps, distan
Weather After the watch is connected to the mobile app, the weather will be automatically synchronized to the watch. Heart rate Heart rate : the green light at the bottom lights up to start the measurement, and the measurement is completed in about 30 to 60 seconds. The measurement value at this time is based on the PPG technology. Blood oxygen Blood oxygen: the red light at the bottom lights up to start the measurement, and the measurement is completed in about 30 to 60 seconds.
Sleep monitoring Shows the sleep monitoring status of the day, the data is updated every day, and the specific data can be synchronized to the APP to view. Sport mode Enter the interface to perform various sports modes: walking, running, mountain climbing, cycling, basketball, yoga, elliptical machine and other sports modes. Stopwatch Stopwatch timing-click on the triangle to start, click again to pause, after pausing, click on the left button to restore.
Timer Timer function-After selecting the corresponding time, start the timer, and the timer will end the vibration reminder. Dial switch The dial can be selected, and the dial can be switched by long pressing the dial, and it supports push dial (multiple dials are built in the watch). Menstrual cycle Set the gender to female in the APP, set the reminder time in the menstrual period function option, and the watch will remind you in advance to prepare.
System message View the Bluetooth name, Mac address, firmware version number and other information of the watch. Switch machine Press and hold the button for 3 seconds to boot. The watch will automatically turn on when it is charging. Click the shutdown icon to shut down. Reset Confirming that the factory reset will erase all personal data.
Precaution: Please read this manual first to ensure safe and correct use 1. This product data is for health management reference only, please do not use it as medical data. If any abnormal physical data is found, it should be checked by the hospital. 2. The waterproof rating of the meter is IP68. 3. Please do not wear it in the following environments: diving activities above 2 meters, high speed is affected by water pressure, it is not recommended to wear it in the shower. 3.
Sensor: 3-axis G-sensor Battery capacity: 200mAh Synchronization method: Bluetooth Resolution: 390*390 Display screen: 1.19 inch AMOLED Working time: about 5-7 days Working temperature: -10℃～50℃ Packing list: host, charging cable Compatible system: IOS 10.0 or above, Android 5.
Warranty Card Customer Information Type Seller Customer Tel Seller Tel Purchase Date (Signature) Customer Address Seller Address Abstract Date Overhaul Fault .
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
