User's Manual

Pairing or adding a camera: (Buy more cameras have this function)
Installation and Use 3
Product Function 1
Product Function 1
Can be configured to monitor up to four cameras with scanning
capabilities can be every 8 seconds automatically switches to receive
another Camera, sound and image transmission: Step1: the monitor
and camera are turned “ON” mode, both the distance of not more
than 100 meters; Step2: Monitor operation, short press "Power /
Menu key” to open, four options appear, press to select the camera
and then OK button to select the icon conversion lens
Adjustable brightness Using the “Left and Right” arrows on the front of
the monitor, adjust the brightness for lighter or darker video.
Adjustable sound Volume adjustements allow higher volume settings to
hear every little sound, while lower volume settings monitor the louder
sounds and cries from baby.Brightness can be adjusted, as well based
on the level of light in the room.
Automatic night vision Rest assured knowing you can see your baby day
and night, including overnight, with automatic night vision. Infrared
automatically adjust to the level of light in the room and transmit a clear
black ad white image in low-night and darkened room conditions.
Sound indicator light 5 Sound indicator on the monitor will be in
accordance with the size of the baby sound light, the greater the
volume, the more light. This function is able to help parents
distinguish the sound of the baby in the room size Language louder
environment.
Power saving function
Monitor in the boot state, you can press the display key to open the
top of the video, turn off the video display, you can conserve power
and extend battery life, video switch is pressed again to turn on the
display screen. Standby mode, more than 210 seconds, the monitor
will turn off automatically.
Enlarge show
Press the zoom button, to change the level of zoom for increasingly
closer views on screen.