User's Manual
PAGE 5
Setup & use (continued)
TO USE PLUGGED-IN
Step 1:
standard electrical outlets.
Step 2:
video appears on screen.
Step 3:
Step 4:
TO USE PORTABLE / BATTERY MODE
Step 1:
Step 2: Make sure the monitor adapter is plugged into the monitor, camera adapter is plugged into
the camera, as they are shown on the body.
Step 3:
TO PAIR MONITOR AND CAMERA ( ADD A CAMERA )
Step 1: Make sure the monitor is at the same area as the camera.
Step 2:
Step 3: Power/VIDEO
OK/Menu Left/Brightness or
Right/Zoom In OK/menu
OK/menu
an availabe number and press OK/menu
Step 4:
Step 5:
The monitor and the camera are paired prior to the shipment. If the monitor
and camera are found not paired for some reason, follow steps below:
ON
OFF
1 2 3 4
to power on.