User's Manual

The mouse receiver inside
The mouse receiver inside
Windows System
(Take Windows 10 as an example)
While the Bluetooth “BT 4.0+2.4G Mouse”is
connected,the mouse can be used normally.
1.Turn on the mouse
2.Press the toggle button
until the white light flashes
slowly.
3.Press the toggle button
for 3~5 seconds until the
white light flashes quickly.
The mouse will be at
Bluetooth pairing mode
this moment.
Click the “Bluetooth devices”button in the computer.
Click the “Add or remove Bluetooth devices”button.
Search the Bluetooth “BT 4.0+2.4G Mouse”,and click
Pairing button.
Shortly press the multi-mode toggle button at the top of
mouse.
When Bluetooth and 2.4G connected successfully,
shortly press the multi-mode toggle button,and you
can switch the modes easily.
2.4G Mode
White light on
Bluetooth 1
Mode White light on
Bluetooth 2
Mode White light on
User Manual
2.4G+Bluetooth+
Bluetooth Wireless Mouse
Left Button
Scroll Wheel
Bluetooth 1 Indicator
Mode Switch Button
DPI Indicator
USB Receiver
Forward Button
Right Button
USB Indicator
Bluetooth 2 Indicator
DPI Button
Battery Bay
On/Off
Back Button
Note:Bluetooth indicator/USB indicator flashes quickly
on low battery.
Product Function 2.4G Connection Bluetooth Connection Ways of Mode Switching Basic Parameters
Package Include
Mac OS System
Please operate the Bluetooth installation
steps(1~3)before pairing.
4.Press the mode switch
to 2.4G mode until white
LED is on.
1.Turn on the mouse.
2.Remove the USB
receiver.
3.Insert the USB receiver
into computer USB port.
Search the Bluetooth “BT 4.0+2.4G Mouse”,and
click Pairing button.If installed completely,the mouse
can be used normally.
Click the “system preferences”button on the Mac.
Click the Bluetooth button on the system preference
folder.
Chip:Nordic NRF51822
Engine:Optics
Mouse Resolution:1000/1600/2400 dpi
Mouse Button Life:Over 3 million
Mouse Size:109*62*37mm
Mouse Weight:76g
2.4G Transmission Parameters:
Transmission distance:10m
Work voltage:1.5V
Work Currency:10.0±0.5mA
Rate of Return:250Hz
Bluetooth Transmission Parameters:
Transmission distance:10m
Work voltage:1.5V
Work Currency:6.0±0.5mA
Rate of Return:125Hz
System needs:
Bluetooth receiver device
USB interface
Windows 8,Windows 10 or higher versions
Mac OS X 10.10 or higher version
Android 4.3 or higher versions
1x Wireless Mouse
1x USB Receiver
1x Manual
EN
1 2 3 4 5 6 7 8
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may
cause undesired operation.