Data Sheet
Table Of Contents
深圳市飞易通科技有限公司
www.feasycom.com
FSC-BT826
6. RECOMMENDED TEMPERATURE REFLOW PROFILE
The re-flow profiles are illustrated in Figure 11 and Figure 12 below.
Follow: IPC/JEDEC J-STD-020 C
Condition:
Average ramp-up rate(217℃ to peak):1~2℃/sec max.
Preheat:150~200C,60~180 seconds
Temperature maintained above 217℃:60~150 seconds
Time within 5℃ of actual peak temperature:20~40 sec.
Peak temperature:250+0/-5℃ or 260+0/-5℃
Ramp-down rate:3℃/sec.max.
Time 25℃ to peak temperature:8 minutes max
Cycloe interval:5 minus
Figure 12: Typical Lead-free Re-flow Solder Profile