User's Manual

6
• DO NOT put the camera in quaky paces. The camera may be unstable
or out of operation if installed improperly. Such installation may also
cause breakdown.
• DO NOT touch, shake or hold the antenna. Touching, shaking or holing
the antenna might influence the receiving of electromagnetic wave,
and thereby influence the receiving effect.
• DO NOT use the camera in complex environment, the obstruction of
stumbling block will affect the electromagnetic wave and influence
the receiving range. Wall, tree and other stumbling block might absorb,
reflect the electromagnetic wave, and influence the receiving range.
• DO NOT use the camera in the places which are covered with
metal.The around metal, such as elevator and cabin, might shield the
electromagnetic wave, and result in inability to receive signals.
• DO NOT use the camera near aggressive chemicals.
• DO NOT place the product near any strong magnetic objects
• DO NOT disassemble the product.
• DO NOT shake or strike the product.
• DO NOT attempt to service the product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Conditions
Please read the following messages to make sure your working
environment is suitable.
• The temperature should be kept between –20˚C and 60˚C (-4˚F to
140˚F). The relative humidity should be kept between 20% and 80%.