User's Manual

1* Helmet Headphone
2* Detachable Clip
1* USB Cable
1* User Manual
Treble and bass Settings:
Please press and hold “ + ” button or " - " button to increase or
decrease the volume (If you think it is not easy to control the
volume on the Bluetooth headset, you also can adjust the
volume on your phone to achieve what you want.)
Switch between Chinese and English：
The Helmet Bluetooth Headset language is English by default.
If you want to switch languages please turn on the headset first
without connect to Bluetooth, and then press the power on button
twice to switch the language.
It can automatically answer a call after the number
is announced
If you have any questions during the use of our product, please feel
free to contact us via seller center. If technical support is required,
please contact : www.jzaq.com
Play
Decrease the volume: Press and hold the "-" button to
decrease the volume and when the volume is reduced
to a minimum make "Dong" sound.
Increase the volume: Press and hold the "+" button to
increase the volume and when the volume is increased
to a maximum make "Dong" sound.
1.Call answer: When the phone comes in, you can dial the
number and answer it automatically
, or just press the “
”
button to answer it.
2.Refuse call answer: Press the “
” button for 2-3 seconds.
3.Automatic/Manual
Answer: Before connecting the phone to
Bluetooth, hold down the volume "+" button and the volume
"-" button at the same time to switch between automatic and
manual answer
.
Short press three times to start the smart voice assistant
to make calls
Phone Call Answer
(Automatic or Manual Answer)
The phone support two simultaneous pairing：
First pair the phone 1 with the Helmet Headset and then
disconnect the phone 1's Bluetooth;
After pairing the Helmet Headset with mobile phone 2, open
the Bluetooth of mobile phone 1 and click connect “BT30” to
connect two mobile phones at the same time;
Now phone 1 and phone 2 paired with Helmet Headset
together and support to answer any call from two phones
(Note: phone1 and phone 2 can not answer calls at the same time.)
Accessories
“ ”
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
FCC Statement:This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure
requirement