User's Manual

M03 Portable Wireless Charging Power Bank User Manual
Item List:
1. Wireless Power bank * 1
2. USB to Type-C cable * 1
3. User manual * 1
Operation of wireless charging power bank
1. Take out M03 power bank from box, attach the magnet side to the back of iPhone 12 series
or later, where it can charge wirelessly. The magnet will align automatically and start wireless
charging automatically. Indicator will light up means work normally. (Other wireless charging
mobile phone need to stick magnetic circle then can charging magnetically, or it’s hard to align
the magnet)
2. Charge power bank M03. Take out USB to Typce-C cable, insert to the power bank charging
interface to charge. Indicator turns to orange color and flash slowly. After full charge, indicator
turns to white color and keep lighting, then remove the USB cable.
3. While charging mobile phone and power bank at the same time, it will charge mobile phone
on priority and charge less to M03 power bank.
4. While power bank capacity is lower than 20%, indicator will flash orange lightï¼›
5. While M03 detecting there is foreign body on the magnetic coil, indicator will flash orange
color quickly.
6. Power bank will turn off automatically after 10 seconds of removing mobile phone from M03.
For next time using, repeat the first step.
Kickstand Usage
1. While charging mobile phone magnetically, unfold the stand to hold the phone, it can be
used horizontally or vertically.(Refer to the below picture)
2. While unfolding the kickstand, the white light and orange light will flash alternately, lasting
for about 10 seconds.
3. While put mobile phone horizontally on the power bank, need to unfold the kickstand to turn
on the power bank to start charging. If put vertically, it will turn on and charge automatically.