2.1CH Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8.
apparatus. 17. WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 18. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 19.
LOCATION OF CONTROLS Front View Top View Back View 4
REMOTE CONTROL 1 Power Indicator 2 3 USB port (only for charging) Remote sensor 4 MODE button Press to toggle between Bluetooth and Aux-in modes 5 Play/Pause button 6 Power On/Standby Button 7 <( / Vol -) Button ·Press this button once to return to the beginning of current track or previous track. ·Press and hold this button to adjust volume level down. 5 8 >( / Vol + ) Button: ·Press this button once to to advance to the next track . Press and hold this button to adjust volume level up.
POWER SOURCES Power of Main unit This unit is designed or operated on AC 100-240V~50/60Hz household mains supply, connect the AC cord into a convenient AC wall outlet. Power of Remote Control To use the remote control, please ensure the remote control battery CR2032 (included) is installed properly and take the insulation clarity paper out.(Once you stop to use the remote control, please Insert in it same as before). Replace the remote control battery when it stops working.
1. Plug the AC cord plug into a convenient AC wall outlet. 2. The power indicator will be lights up with ‘Red’ colour. The unit enters into ‘STANDY BY’ Mode. key on remote 2. Press the Button on main unit or press & hold the control to turn on the unit. key on remote 3. Press and hold the Button on main unit or the control to turn on the unit to switch the unit back to Standby mode. 4. Remove the power plug out of the AC wall outlet if you want to switch off the main voltage completely.
wirelessly transfer music to the device. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals are wirelessly transferred between the playing device (source) and the receiving device. Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed. Logging on devices (Pairing) Before you listen to music via the unit, you must pair the devices. 1. Ensure, that the Bluetooth function is activated in your player (e.g.
• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones) getting released in the future. • To ensure an optimal connection, make sure that the battery of your player is completely charged. • Some of the mobile phone brands have an energy-saving mode. Deactivate the energy-saving mode as it can otherwise result in problems during the data transfer through Bluetooth.
TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player, please refer to the following chart. Fault Unit cannot be operated. No audio signal via the Bluetooth connection Speaker cannot be connected Poor sound quality from a ® Bluetooth device Remote control is not functioning properly. Cause Solution Unit crashes and “hangs” Disconnect from the mains for around 5 seconds. Then switch the unit on again. Speaker is not paired to the audio source.
SPECIFICATIONS Model: Power Supply: Power Consumption: Power of Remote control: Standby power consumption: Protection Class: Net Weight : Temperature rage for use: MW-1266 100-240V ~ 50/60Hz 40W 1x3V type CR2032 Lithium Battery ≤0.5W II approx. 2.5kg 0-45℃ Bluetooth Bluetooth support : V3.0+EDR Range : approx. 10 metres Transmission frequency : 2.4GHz Protocols : A2DP 1.2 The right to make technical and design modifications in the course of Continuous product development remains reserved.
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.