User's Manual

Poor sound
quality from a
®
Bluetooth
device
Bluetooth device
is almost out of
range of the
MW-1265
Move your Bluetooth device
closer to the MW-1265
Remote control is
not functioning
properly.
Low battery.
Remote Control
is not pointed
to ward the IR
window
Point the Remote Control to
ward the unit IR window,use
with in 10 feet of the unit.
Replace the battery with
correct type CR2032
Apple device does
not respond to the
speaker system.
Apple device is
not installed
properly.
Remove your Apple device from
the dock and check for obstruction
on the connectors in the dock and
on your Apple device.
Then reseat it on the dock.
Apple device is
locked up.
Please make sure that your
Apple device is working properly
before docking into the unit.
Please refer to your Apple device
manual for info on resetting
the device.
Apple device does
not recharge.
Apple device is
not installed
properly.
Remove your Apple device
from the dock and check for
obstruction on the connectors
in the dock and on your Apple
device. Then reseat it in the dock.
No video output
on external TV.
TV is not turned
on and not set
to AV IN mode.
Video cable
is broken.
Check TV power supply
again and turn it on.
Then set it to AV IN mode.
Change to a good or new
composite video cable.
“Made for iPod”, ”Made for iPhone”, “Made for iPad”
mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, iPad, respectively,
and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its complicance with safety
and regulatory standards.
Please note that the use of the accessory with iPod,
iPhone, iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano and iPod
touch are trademarks of Apple Inc. registered in the
U.S and other countries.
English
9
English
10
- If you play back a series of Podcast videos under the - While you are playing self-complied videos prepared
same folder or camera rolls under the same date, from 3rd party video conversion software, executing
pressing the on the remote will skip forward to the skip forward/backward, Menu, Up/down or Video
next video until the last one is reached. Pressing the On/Off functions may cause the video to play back from
Button will skip backward to the previous video until the beginning instead of where left off, this is normal.
the first one is reached. Videos and podcasts downloaded directly from Apple
rd
- If you are playing self-complied videos and used a 3
iTunes Store will work normally.
party video conversion program, executing the skip
forward/backward, Menu and Up/down functions may
cause the video to start play back from the beginning
of the video instead of where it left off, this is normal.
Videos and podcasts downloaded directly from the
Apple iTunes Store will function normally.
Watching Videos on Your iPod nano (except iPod
th
nano 6 generation)
1. In iPod mode, mount the iPod nano onto the Flexible
Docking Connector of the main unit carefully.
2. Select the “Videos” function on the Apple device to
access your video library.
3. Press the Video Button of the remote once to switch
video output to your external TV.
4. Use the Click Wheel and Center button of the iPod nano
to choose the video or podcast you want to play.
5. The video will begin playing on the external TV screen.
6. High quality 2.1 channel audio output from your videos
will be playback through the built-in stereo speakers
and subwoofer.
7.The Play/Pause , , , Repeat, Vol + and Vol-
Buttons all work in the same way as you watch the video
on iPod nano screen.
Note:
- Do not press the Play/Pause Button before a video is
playing, otherwise it will resume playback of the last
song being played in the iPod music library instead.
- Using the Video On/Off Button, you can be freely switch
between the iPod nano screen (default) and external TV
as often as you like.
- If you decide to change back to local screen mode
afterwards, press Menu Button on the click wheel of
your iPod nano to exit to the video selection screen
after pressing the remote Video On/Off Button once
(remarks: the video will continue to play on TV). Then
choose your desired video manually with the Click
Wheel and press the Center Button on the iPod nano to
resume playing.
- If you play back a series of podcast videos under the
th
same folder or camera rolls taken by iPod nano 5
generation under the same date, pressing the on
the remote will skip forward to the next video until the
last one is reached. Pressing the Button will skip
backward to the previous video until the first one is
reached.
The Purple color power indicator flashes.