BRAND Portable Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
Cleaning The unit should be cleaned only as recommended. See the section « Care and Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Damage Requiring Service This unit should be serviced by qualified service personnel when: Objects have fallen into or liquid has been spilled into the enclosure. The unit has been exposed to rain.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
LOCATION OF CONTROLS Top View 1. -Button Press this button to adjust volume level down. 2. + Button z Press this button to adjust volume level up 3. z 4. Button(for USB only) Press this button once to return to the beginning of current track or previous track.
·Press this button once to to advance to the next track . Power On/Standby Button Battery charging Indicator (Red color) z Rapid flashing =low battery While charging : z Flashing =charging z Steady Red= full charged z 5. 6. Operating mode indicator (Blue/Green/Cyan) Blue color =Bluetooth mode Green=Aux-in mode Green=USB mode 7. 8. Built-in Microphone Button z While unit is in Bluetooth or TF card Playback mode, press once to play or pause the current track.
USB power adaptor (not included) with a rated output of DC 5V 500mA and up. Note: The mini USB CHARGING JACK located on this unit is only designed for charging the built-in Li-ion battery. CHARGING THE BATTERY FOR FIRST TIME 1.) Charge the built-in Li-ion battery a minimum of 4 hours prior to first use. Plug the unit into the USB port on your computer or into a USB power adaptor (not included) using the included USB cable. 2.
1. Charging time will vary if you are listening to music while charging the internal battery. We recommend you switch off the speaker power during the charging process. 2. To prolong the life of a rechargeable battery, it is recommended to completely discharge it before fully charging it again . 3. Rechargeable batteries need to be cycled for maximum performance and longer battery life.
Note: The speaker is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs. TURN THE SPEAKER POWER ON/OFF 1. Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the orange round mark on the selector can not been seen),a voice prompt “Power on” and a beep sound is heard in 2-3 seconds.
z z If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and has a music-player function, then you can also wirelessly transfer music to the device. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals are wirelessly transferred between the playing device (source) and the receiving device. Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed.
4. If your device asks for a passkey (depending on the device manufacturers, model, and software version), then enter digits “0000”(four zeros) and press OK. If pairing has been carried out successfully, a voice prompt “Pairing completed” and a beep sound is heard, meanwhile, the Blue color indicator stops flashing. If the speaker has ever been paired with a Bluetooth device before. You need to follow the pairing instructions below to link the speaker with your Bluetooth device . 1.
3. Adjust the volume control of your cell phone to obtain the desired sound level. button again, a short beep 4. To end the call, just tap the sound will be heard and the call will end. If you were playing music from your cell phone to the speaker before answering the call, the music will automatically resume playing when you hang up . 5. To ignore an incoming call, simply press and hold the button on the speaker for about 2 seconds, a beep sound will be heard and the call will be ignored .
OPERATING THE SPEAKER IN AUX-IN MODE If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this unit via bluetooth directly, you can still play it on the speaker via an audio connecting cable. 1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on your player, plug the other end of cable into the unit AUX-IN jack of the speaker. 2. Turn on the external audio source and play your device. 3.
Troubleshooting Guide Should you experience difficulties in the use of this player, please refer to the following chart. Fault No Charging Cause Solution The USB power adaptor (not included) is not plugged into a wall outlet or the USB cable (included)is not plugged into the mini USB jack on the bottom of the MW-1306 Plug the USB power adaptor (not included) into a wall outlet and plug the USB cable (included) into the mini USB jack on the MW-1306 Wall outlet functioning.
No audio signal via the Bluetooth connection Bluetooth version is not supported. Check whether a connection exists. If necessary, pair the speaker again to the audio source. Increase the volume on the speaker Increase the volume on the audio source. Check whether the audio source supports the A2DP protocol Switch on the audio source Switch on the Bluetooth function in the audio source. Use a different playback unit.
The right to make technical and design modifications in the course of Continuous product development remains reserved. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 15.