User's Manual

OPERATING THE SPEAKER IN BLUETOOTH MODE

Bluetooth involves a technology for wireless radio connection of devices over a short distance.

Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in the ISM

band (Industrial, Scientific and Medical). Interference can be caused, for example by

WLAN-networks, DAB radios, cordless phones, or microwave ovens which work on the

same frequency band.

l This speaker offers you the possibility to use a Bluetooth enabled device. The functional

radius is limited to approx.10 metres depending on the surroundings and the unit used.

l If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and

has a music-player function, then you can also wirelessly transfer music to the device. The

A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals

are wirelessly transferred between the playing device (source) and the receiving device.

l Due to the different device manufacturers, models, and software versions, a full functionality

cannot be guaranteed.

Pairing (Linking) A Bluetooth Enabled Cell Phone Or Other Bluetooth Enabled Device To

The Speaker

If the speaker has never been paired with a Bluetooth device before . You need to follow the

pairing instructions below to link the speaker with your Bluetooth device .

1. When the speaker turned on, the Operating mode Indicator flashes in blue.The speaker is

ready to pair (link) with your Bluetooth device .

2. Activate Bluetooth on the compatible device, and set it to search for compatible devices.

3. Select the speaker name:”1308” from the list of found devices.

Tips: Only one playback unit can be connected to the speaker. If the speaker is already

connected to another playback unit, the speaker will not appear in the BT selection list.

4. If your device asks for a passkey (depending on the device manufacturers, model, and

software version), then enter digits “0000”(four zeros) and press OK.

If pairing has been carried out successfully, a voice prompt “Pairing completed” and a beep

sound is heard, meanwhile, the Blue color indicator stops flashing.

If the speaker has ever been paired with a Bluetooth device before. You need to follow

the pairing instructions below to link the speaker with your Bluetooth device .

1. After turning on the speaker, the speaker will search for the last paired device . The

operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device , a

beep sound is heard and operating mode indicator will keep in blue and stop flashing .

2. After successfully pairing (linking) , you can begin playing music from your Bluetooth device

wirelessly to the speaker .

3. Press the + / - button on the speaker to adjust to the desired volume level .

Using The Speaker as a Handfree Bluetooth Speakerphone

1. Link your cell phone to the speaker via Bluetooth as described above .

2. When receiving an incoming call on your cell phone , tap button on the speaker to

switch the incoming call from cell phone to the speaker. A short beep sound will be heard

confirming the call was answered. Complete your call using the built-in microphone and

speaker.

3. Adjust the volume control of your cell phone to obtain the desired sound level.

4. To end the call, just tap the button again, a short beep sound will be heard and the call

will end. If you were playing music from your cell phone to the speaker before answering the

call, the music will automatically resume playing when you hang up .