ManiWay 2.1CH Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water.
8. Attachments Do not use attachments not recommended by the product manufacturer 9. Lightning and Power Surge Protection Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of electric shock. 11. Damage Requiring Service This unit should be serviced by qualified service personnel when; A.
- The mains plug of adapter is used as disconnect device, the adapter shall remain readily operable. - Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
LOCATION OF CONTROLS DOCKING STATION: Top View Front View Back View 4
REMOTE CONTROL 1 Play/Pause 2 MODE Button button 3 ·Press this button once to return to the previous track. 4 9 USB slot 10 Aux-In Jack 11 DC 12V Jack 12 Power On/Standby Button 13 Stop Button ·Press this button once to to advance to the next track . 14 - Button 15 OK/Enter button 5 Press and hold this button to adjust volume level down. 16 Down button 6 + Button 17 UP Button Press and hold this button to adjust volume level up.
POWER SOURCES Power of Main unit The main base is operated by an external AC-DC Power Adaptor with an output of 12V DC / 3000mA (included). 1. Insert the adaptor's DC output plug into the DC-IN jack on the back of the Main base 2. Plug the adaptor into a convenient AC wall outlet. Power of Remote Control To use the remote control, please ensure the remote control battery CR2032 (included) is installed properly and take the insulation clarity paper out.
1. Insert the DC plug of the AC-DC power adaptor into the DC 12V jack on the back of the main unit. 2. Connect the AC-DC adaptor with the power cord (included),plug the power plug into a convenient AC wall outlet. 3. Press the POWER ON/OFF button to turn on/off the unit. 4. Remove the main plug of the adaptor out of the wall outlet if you want to switch off the main voltage completely.
wirelessly transferred between the playing device (source) and the receiving device. Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed. Logging on devices (Pairing) Before you listen to music via the unit, you must pair the devices. 1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For this, refer to the operation manual of your player. 2.
To ensure an optimal connection, make sure that the battery of your player is completely charged. Some of the mobile phone brands have an energy-saving mode. Deactivate the energy-saving mode as it can otherwise result in problems during the data transfer through Bluetooth. To be able to transfer audio data, Bluetooth needs to stay activated in your player Observe the operation manual of your player. If a mobile phone on which you are playing music receives a call, the music will be interrupted.
Description of the USB controls : You can pause and continue music playback. Press again to continue playback. : Press 1x = Skip to the beginning of current song. Press 2x = Skip to the previous song. :Press to skip to the next song and the following songs. REPEAT: Activates the Repeat function. . All titles are constantly repeated by default . Press the Repeat button to repeat only the current title, the purple colour indicator flashes. RAN: Activates the Random play function.
TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player, please refer to the following chart. Fault Unit cannot be operated. No audio signal via the Bluetooth connection Speaker cannot be connected Poor sound quality from a Bluetooth® device Remote control is not functioning properly. Cause Solution Unit crashes and “hangs” Disconnect from the mains for around 5 seconds. Then switch the unit on again. Speaker is not paired to the audio source.
SPECIFICATIONS Power Supply Power adaptor (included): Input AC 100-240V ~ 50/60Hz Output DC 12V 3A Power Consumption: 35W Output Power(rms): 4.5WX2+15W(Subwoofer) Power of remote control: 1 xDC 3V CR2032 button cell (included) Temperature rage for use: 0-40℃ Bluetooth Bluetooth support : Range : Transmission frequency : Protocols : V2.1+EDR approx. 10 metres 2.4GHz A2DP 1.