2.1CH Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water.
Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product, 8. Attachments Do not use attachments not recommended by the product manufacturer 9. Lightning and Power Surge Protection Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 10.
- Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. These symbols may be found on the device and shall indicate the following: The lightning symbol warns the user of dangerously high voltages inside the case. The exclamation mark symbol points to important instruction or maintenance remarks in the accompanying guidelines. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
LOCATION OF CONTROLS Top View Front View Back View 4
REMOTE CONTROL 1. Power On/Standby Button Press to turn on/off the unit 2. MUSIC Button Press to choose music mode 3. MOVIE Button Press to choose movie surround mode 4. Play/Pause button Press to play or pause the current track When there is a phone call, press to answer or end call. 5. Button Press once to return to the beginning of current track or previous track. 6. Button Press once to advance to the next track. 7. -/ Button Press to adjust volume level down. 8.
11. Pilot Lamp 12. USB Charging Port 13. AUX-IN JACK 14. AC Power Cord 15. Button Press to reject the incoming call 16. PAIR Button Press and hold for 3 seconds to activate pairing mode. If the speaker is already connected and you would like to connect to a different device, press and hold for 3 seconds to break the current connection and initiate pairing. 17. MUTE Button Press to mute the sound 18. MODE Button To select different play modes: Bluetooth/Aux Button To search down during play Button 20.
BATTERY NOTE AND CARE Danger of explosion if the battery is replaced incorrectly. Replace only with the same type battery. Only use a good quality known brand battery to ensure the longest life and best performance. If the remote is not to be used for an extended period of time, remove the battery. An old or leaking battery can cause damage to the remote and may void the warranty. Do not dispose of batteries in fire. Batteries may leak or explode.
between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and Medical). Interference can be caused for example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which work on the same frequency band. This device offers you the possibility to use a Bluetooth enabled device. The functional radius is limited to approx.10 metres depending on the surroundings and the unit used.
For the further procedure, please refer to the user manual of the playback unit. If possible, adjust the volume of the external unit to a comfortable level. NOTE: • Depending on the device manufacturer, you need to perform the registration (PAIRING) again to connect the devices • The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones) getting released in the future. • To ensure an optimal connection, make sure that the battery of your player is completely charged.
OPERATING THE SPEAKER IN AUX-IN MODE 1. Press the button to turn on the unit. 2. Connect an audio cable to the headphone or line-out jack of an audio device and plug the other end into the Aux -in jack located on back of the main unit, it will access to AUX-IN mode automatically, the Pilot lamp changes to Green color 3. Turn audio device on and play this device. 4.
Pairing does not work Speaker cannot be connected Poor sound quality from a ® Bluetooth device Remote control is not functioning properly. Audio source switched off Check whether the audio source supports the A2DP protocol is Switch on the audio source Bluetooth is switched off at the audio source. Switch on the Bluetooth function in the audio source. Bluetooth version is not supported. Use a different playback unit.
Range:..................................................................................upto 10 metres Transmission frequency:................................................................2.4 GHz Protocols:....................................................................................A2DP 1.2 The right to make technical and design modifications in the course of continuous product development remains reserved.