BRAND Portable Bluetooth Speaker PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 8.
apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. CAUTION: These servicing instructions are for use by qualified service personnel only.To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 15.
21. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage”within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
25. Use of the apparatus in moderate climates. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. INDUSTRY CANADA REGULATORY INFORMATION This device complies with Industry Canada license-exampt RSS standard(s).
Industry Canada Regulatory Information CAN ICES-3(B)/NMB-3(B) Avis d’Industire Canada CAN ICES-3(B)NMB-3(B) LOCATION OF CONTROLS Top View Back View 6
1. M (MODE) Button .To select different play modes: Bluetooth/FM/USB/Aux 2. Button z In Bluetooth or USB mode : Tap this button once to return to the beginning of current track or previous track. z In FM mode: .Press and hold this button to auto search and automatically save up all the stations with strong signals in sequence. It will automatically play the No. 1 station saved once the auto searching is finished. .Tap this button continuously to manually tune to desired station. 3.
.Tap this button continuously to manually tune to desired station. 5. -Button Press this button to adjust volume level down. 6. + Button z Press this button to adjust volume level up 7. 8. Built-in Microphone LED Display 9. Battery Status Indicator (Green color) z Rapid flashing =low battery While charging : z Flashing =charging z Steady Green= full charged 10. Telescopic Antenna 11. Aux-In Jack 12. USB port 13.
2. Plug the AC cord plug into a convenient AC wall outlet. 3. The green color battery charging indicator will light up & charging begins. Button to turn on the unit, the LED 3. Press and hold the display will light up. 4. Press and hold the Button again to turn off the unit. 5.Remove the AC cord out of the wall outlet if you want to switch off the main voltage completely. OPERATING THE SPEAKER IN BLUETOOTH MODE Bluetooth involves a technology for wireless radio connection of devices over a short distance.
z Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed. Pairing (Linking) A Bluetooth Enabled Cell Phone Or Other Bluetooth Enabled Device To The Speaker If the speaker has never been paired with a Bluetooth device before . You need to follow the pairing instructions below to link the speaker with your Bluetooth device . 1. When the speaker turned on, press the “M” button repeatedly, until “bLUE” is shown on the display.
If the speaker has ever been paired with a Bluetooth device before. You need to follow the pairing instructions below to link the speaker with your Bluetooth device . 1. After turning on the speaker, the speaker will search for the last paired device. If the unit finds the paired Bluetooth device, a beep sound is heard and The “bLUE”symbol stop flashing . 2. After successfully pairing (linking) , you can begin playing music from your Bluetooth device wirelessly to the speaker . 3.
the call, the music will automatically resume playing when you hang up. LISTENING TO FM RADIO Extend the Antenna Extend the telescopic antenna fully and adjust the angel of antenna for best reception. Tuning and Playing the Radio 1. Press M button until the FM frequency appears on the display to enter FM Radio mode. 2.
100.6MHz, press the “ ” or “ ” button to fine tune to the exact frequency of the desired station. USB port • This device has been developed in line with the latest technical advances in the USB filed. The wide range of different USB storage devices of all types which are currently on the market, unfortunately do not allow us to guarantee full compatibility with all USB storage devices. For this reason, in rare cases there may be problems in playing back files from USB storage devices.
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this unit via bluetooth directly, you can still play it on the speaker via an audio connecting cable. 1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on your player, plug the other end of cable into the unit AUX-IN jack of the speaker. 2. Turn on the external audio source and play your device. 3. Press M Button until “ AUH” shows up in the display to enter the AUX-IN mode. 4.
Battery Status Indicator The battery status indicator is normally off to conserve battery power. When the internal battery capacity is very low, the battery Indicator will rapidly flash to alert you to recharge the internal battery as soon as possible. Charging The Battery For First Time Charge the built-in Li-ion battery a minimum of 4 hours prior to first use. 1.) Plug the unit into the AC wall outlet using the included AC cord. 2.
Battery Note and Care Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Li-ion batteries must be recycled. Do not dispose of in the trash. Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings are correct for the battery pack being charged. Charge batteries on a fireproof surface and away from flammable items or liquids. Batteries should NEVER be left unattended while charging. Only adults should charge the batteries.
Do not dispose of batteries in fire, batteries may explode or leak. Troubleshooting Guide Should you experience difficulties in the use of this player, please refer to the following chart. Fault Unit cannot be operated. Cause Unit crashes and “hangs”. No Charging Wall outlet is not functioning. NO Sound No audio signal via the Bluetooth connection The battery is dead. The speaker is not linked with the cell phone. Volume set too low. Speaker is not paired to the audio source.
the speaker Increase the volume on the audio source. Pairing does not work Speaker cannot be connected Poor sound quality from a Bluetooth® device Radio interference. Check whether the audio source supports the A2DP protocol Audio source is switched off Bluetooth is switched off at the audio source. Bluetooth version is not supported. Bluetooth device is almost out of range of the MW-1361B Switch on the audio source Switch on the Bluetooth function in the audio source. Use a different playback unit.
Accessories : AC power cord, 3.5mm AUX-in Cable, User Manual The right to make technical and design modifications in the course of Continuous product development remains reserved.