User's Manual

Pair the Speaker

1. If you haven’t paired this unit with a device, or the paired devices list is

empty, pairing mode is activated.

2. Activate Bluetooth on the compatible device, and set it to search for

compatible devices.

3. Select the speaker name: “MW-1473” from the list of found devices.

Tips: Only one playback unit can be connected to the speaker. If the

speaker is already connected to another playback unit, the speaker will not

appear in the BT selection list.

4. If your device asks for a passkey (depending on the device

manufacturers, model, and software version), then enter digits “0000”

(four zeros) and press OK.

If pairing has been carried out successfully, “ bLUE ” will stop flashing.

4. After connected completely, you can listen to music wirelessly through

Bluetooth and select music in Bluetooth device.

5. Short press button to pause or resume playback.

6. Press button to skip to next track, or press button to the

beginning of current track or previous track.

NOTES:

• Depending on the device manufacturer, you need to perform the

registration (PAIRING) again to connect the devices

• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile

phones) getting released in the future.

• Some of the mobile phone brands have an energy-saving mode.

Deactivate the energy-saving mode as it can otherwise result in

problems during the data transfer through Bluetooth.

• To be able to transfer audio data, Bluetooth needs to stay activated in

your player, Observe the operation manual of your player.

• If a mobile phone on which you are playing music receives a call, the

music will be interrupted. The sound however is not played back via the

speaker. After you have ended the call, the devices are connected to

each other again and playback continues.