User's Manual

13
Sleep Timer Setup
- While listening to Radio/ AUX, press and hold “SLEEP” button until
“sleep” icon start to flash, press Sleep button to adjust the sleep timer from
“90/80/70/60/50/40/30/20/10/00”minutes. After adjusted the sleep timer,
just wait the ”sleep” icon stop flash to confirm setting.
-when the sleep timer is active, press and hold sleep button to show the
current sleep time, press again to adjust it again to modify the setting.
Note: Press the sleep button until “00” is flashing to cancel the sleep mode,
the sleep icon “SLEEP” disappears simultaneously.
SNOOZE Operation
-Press to select LCD backlight Bright/DIM LEVEN1/DIM LEVEL2/ OFF
-When the alarm is activated (waking you), pressing the SNOOZE button
will stop the alarm one time. The Alarm icon will flash simultaneously on
the display and enter into Snooze status. The alarm will sound again after
9 minutes (default nap time)
TROUBLESHOOTING
Problem Cause Solutions
No sound Volume is too low Increase the volume
Poor sound quality
in Radio mode
Radio signal too
weak
Try to adjust the antenna
position
FM: Hiss Low signal
strength
Check/move antenna
Move radio
Rescan local
No audio signal
via the Bluetooth
connection
No audio signal
via the Bluetooth
connection
Check whether a connection
exists. If necessary, pair the
speaker again to the audio
source.
Volume too low
Increase the volume on the
speaker
Increase the volume on the
audio source.