BRAND 2.0CH Wireless Soundbar PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model No.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: REMOVE THE BATTERY FROM REMOTE CONTROL IF WILL NOT BE IN USE FOR A LONG PERIOD. DO NOT PLACE BATTERY IN TRASH. PLEASE RECYCLE OR MANAGE AS HAZARDOUS WASTE. Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. z Read these instructions. z Keep these instructions.
z Do not defeat the safety purpose of the polarized or grounding plug. A polarize d plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provi ded for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
or moisture. The apparatus shall not be exposed to dripping or splashing and t hat objects filledwith liquids, such as vases, shall not be placed on apparatus. z WARNING: The battery (battery or batteries or battery pack) shall not be expo sed to excessive heat such as sunshine, fire or the like. z WARNING: The main plug is used as disconnect device, the disconnect devic e shall remain readily operable.
permanent battery damage, fire, or explosion. Please remove your product from the automobile when you exit, do not place your product in the trunk of your automobile, and do not leave your product in any location where temperatures may exceed 50℃. ECOLOGY Your product must be disposed of properly according to local laws and regulations. Because this product contains a battery, the product must be disposed of separately from the household waste.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
Controls 1. Remote Control Sensor 2. - Button Press to decrease the volume level. 3. +Button Press to increase the volume level. /SOURCE Button 4. Press this button to turn ON or press and hold to Standby mode. Short press this button to select different play mode during power on 5. LED Status Indicator Red=Standby mode Blue=Bluetooth mode Green=AUX/RCA input mode Yellow=USB mode 6. RCA (L, R) Socket 7. 3.5mm Aux-in Socket 8. Main Power ON/OFF Switch 9. Power Cord 10.
1. Power Button (On/Standby) 2. MODE button (Bluetooth/AUX) 3. Play/Pause button 4. Next track 5. Previous track 6. Volume – Button 7.
Before using the speaker Plug the power cord to a wall outlet (120V~60Hz). 3.5mm AUX/RCA inputs operation 1. Ensure that the unit is well connected to the TV or other audio device via the accompanied 3.5mm-RCA cable. 2. While in Power On mode, press the /SOURCE button on the main unit repeatedly or press the AUX/RCA button on remote control to select the AUX/RCA input mode. 3. Operate your audio device directly for playback features. 4.
4. previous or next track Press “VOL+” / “VOL-” button on remote control or tap the“+”/ “-” button on the main unit to raise/lower the volume level. NOTE: • The USB port is also designed for charging external devices during any mode other than USB mode. Connect and use the speaker (Bluetooth mode) 1. Power on the speaker. 2. Change to Bluetooth mode. Status indicator will blink blue. 3. On your Bluetooth device, turn on Bluetooth and scan for device in its Bluetooth menu.
Operation distance:up to 10ft (3m) Operation angel: ±30º Trouble shooting Problem No audio signal via the Bluetooth connection Cause Solution Speaker is not paired to the audio source. Check whether a connection exists. If necessary, pair the speaker again to the audio source. Increase the volume on the speaker Increase the volume on the the audio source.