◢MR6121E UHF reader user manual（Ver 1.0）◣ 1 MR6121E UHF Reader User Manual Shenzhen Marktrace Co., Ltd Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C. Post：518057 Phone：0755-2654 6392 E-mail：technical@marktrace.com FAX：0755-2655 3743 Website：www.marktrace.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 2 Dear Customer： Many thanks for bought Marktrace device. Go through precuts user manual carefully before you operate. To make sure Marktrace device work correct. Any questions, please contact us. We welcome your feedback and comments. Shenzhen Marktrace Co.,Ltd. Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C. Post：518057 Phone：0755-2654 6392 E-mail：technical@marktrace.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 3 MR6121E UHF reader User Manual (Ver1.0) Disclaimer Martkrace reserve the right to update and modify this user manual. For the new documents may have no further notice. Don’t tear up the warranty label or take reader apart to repair by yourself, we reject perform warranty duties if this happened. Shenzhen Marktrace Co.,Ltd have trademark right on the trademark which in this user manual and receive legal protection. DO NOT make free with theses trademarks.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 4 Contents 1 MATTERS NEED ATTENTION............................................... 6 2 READER INSTRUCTION .................................................... 7 2.1 UHF READER INTRODUCTION ............................................... 2.2 READER INSTRUCTION ..................................................... 2.3 READER APPLICATIONS .................................................... 2.4 READER MAIN FUNCTIONS ..................................................
◢MR6121E UHF reader user manual（Ver 1.0）◣ 5 6.2.1 ISO18000-6B tag Identify ............................................ 26 6.2.2 Multi-tag user data reading ........................................... 27 6.2.3 Single tag data reading and read with UID .............................. 28 6.2.4 Single tag writing and write with UID ................................... 29 6.2.5 Single tag data lock ................................................. 29 6.2.6 Single tag lock and query .............................
◢MR6121E UHF reader user manual（Ver 1.0）◣ 6 1 Matters need attention 1、 Dismantle and parts replace：Marktrace has no warranty duties on those faults which caused by dismantle and parts replace by customer .； 2、 Power supply：please use the power adaptor which alone with precuts to get power. If not may harm the products.； 3、 Falling damage：Mind parts damage by device falling, if this happens, turn off power immediately and connect the distributor or Marktrace customer service center.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 7 2 Reader instruction 2.1 UHF reader introduction Model Description Parameter MR6121E Mid-range integrated reader 9dBi Gain antenna inside Photo 2.2 Reader instruction This products has the features like multi protocol compatible, multi-tag identify, multi-tag multi area read and write, fast reader speed, can connect to four antennas etc.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 8 7、 Have RS232、RS485、 Weigand、TCP/IP、Relay etc output interface； 8、 Compatible with tag match function，Reader can identify the tag which match the condition or not identify these condition tags by setting the match conditions.； 10、Compatible with data cache function, Using FRAM (ferroelectric memory) which can save data when power down，memory capacity is 32KBytes， Can save 2200 pcs tag data in 12 Bytes data length. 2.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 9 2、 Write tag：Can write the same data length in multi-tag’s same area.； 3、 Tag match：Can read match tag or dismatch tag via setting the match conditions； 4、 Make data communicate and change with the connection between standard communication interface and controller or PC,； 2.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 10 3 Reader Structure and Interface Explanation 3.1 Reader Structure Explanation 1、 MR6121E integrated reader structure explanation 3.2 Explanation on the reader communication interface 1. RS232: the Reader provides standard RS232 communication interface as the output port for data modulation. RS232 has 8 data bits format: 1 start bit and 1 stop bit, no parity bit. The default baud rate is 115200 bps.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 11 4. RS485：Reader provide RS485 communication interface（10、11 pin）， work as data main output mode，also can connect with PC via serial port， use RS232-RS485 converter，in this way，RS485 interface support RS232 all supported functions; 5.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 12 4 Quick Start Guide 1、 Connect antenna to reader’s antenna port，connect power adapter to reader and then power on，connect reader to LAN or PC by network cable； 2、 In PC open demo software“MR6100 Demo V1.0”，fill in reader IP address and click“Connect”to connect reader（reader factory default IP address: 192.168.1.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 13 5, Click “Stop” button to Stop identify operate. Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C. Post：518057 Phone：0755-2654 6392 E-mail：technical@marktrace.com FAX：0755-2655 3743 Website：www.marktrace.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 14 5 Reader parameter configuration 5.1 Webpage configuration Reader connect to LAN through TCP/IP port，or directly connect PC，in PC IE browser input reader IP address （ reader factory default IP address: 192.168.1.200），after running then open WEB page as below： Can be configure as below： 1、Basic Item configuration Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 15 1）User can configure IP address、RF power、frequency、antenna port、applied mode、read card indicating etc.
◢MR6121E UHF reader user manual（Ver 1.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 17 ASCII Code Format Hex Format All above configuration will be valid only after click left bottom button“set” button 5.2 Demo software Configuration 5.2.1 Reader connection Click MR6100Demo.exe software, input reader’s IP into the IP input box (Default IP: 192.168.1.200, Port: 100 which is fixed), then click ‘connect’ ICON, software information display box will display the reader’s parameter on the success connection.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 18 RF Power on Power setting; Query and set Antenna on Antennas Setting. Take below image for the reference. 2、Set the RF power separately from the range of 0 to 25dBm. 3、On the reader connection, the antenna port will begin self detection, and the connecting Antenna port is on GREEN ICON, Disconnecting Antenna port is on RED ICON. Only the selected GREEN ICON port’s antenna works.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 19 2、Favor speed is for single tag or few tags reading with the high speed tag reading rate. Favor Speed working mode is configurated for the applications require high speed tag reading rate (e.g. Not-stop Highway toll) Favor Quantity is for the multi and tense tags reading, Favor Speed working mode is configurated for the applications (e.g.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 20 2、Reader automatically reset when set a new IP address, and need to reconnect the reader with new IP address 5.2.7 GPIO Setting On Setting interface’s Set Out Port menu for the reader output port setting. The reader has two sets output port and one set Relay port. IO Port0 and IO Port1 are output port with default High level voltage (5V) and Low level voltage (0V) configurable. IO port2 is Relay output port with default OFF setting.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 21 6 Demo software demonstration 6.1 EPC Gen2 tag Demonstration 6.1.1 Multi tag Identify 1、On Gen2 EPC Multi Tag interface’s Identify menu for the Multi tag identify, and click Identify ICON to start the reading. EPC code, antenna number and tag reading times displayed on the interface info. box. On the interface bottom displays tag number, Peak reading rate, Read times, total reads, Average reading rate, and duration reading time.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 22 6.1.2 Multi Tag Read & Write 1、On Gen2 EPC Multi Tag interface’s Multi Tag Read menu for the Multi tag read, Multi tag reader is read tag’s RESERVE Membank, EPC Membank, TID Membank & USER Membank at the same time. The steps are: 1) select the reading Membanks, 2) select the start reading address and the reading word count (EPC tag’s unit is word), and then click ‘Read’ ICON to start the Multi-tag reading. Take below image for the reference.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 23 Membank, and USER Membank at the same time. The steps are: 1) select the encoding Membank, 2) select the tag start encoding address and the encoding word count (EPC tag’s unit is word), 3) input the encoding value, then click ‘Write’ ICON to encoding the multi-tag. Take below image for the reference. 4、Click ‘Stop’ ICON to stop the Multi-Tag encoding, at the bottom of the demo software display the Success encoding tag number, and tag encoding duration time.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 24 with the EPC Gen2 Protocol, RESERVE Membank’s data is invalid for the tag filter rule setting. Please 1) select the EPC tag Membank, 2) the word addr. 3) Word Length, 4) Input the value, then Click ‘Config’ ICON for the Tag filter rule setting. 1、Only on Favor quantity working mode, the Tag filter setting is valid, on Favor speed working mode, tag filter setting is invalid. 2、Match setting, reader reads and displays only the condition matched tag.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 25 2、EPC Gen2 Tag Lock level are unlock, unlock forever, and secure lock, lock forever 1）Unlock means the tag is not to encrypted the tag 2）Unlock forever means the tag will not be locked forever 3）On Secure Lock, RESERVE Membank only can be read and write with Access Password, EPC Memban and USER Membank can be encoded with Access Password. 4）Lock forever, if the tag is set to lock forever, it can’t be unlock again. 6.1.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 26 Write tag’s Word Addr, and the WordCnt 4、Secure locked Reserve Membank can only be read & write with Access Password, Secure Locked EPC Membank and Secure Locked USER Membank can be encoded with Access Password, while can read without the Access Password. 5、 In accordance with the EPC Protocol, TID Membank can’t be locked, Access Password is invalid for TID Membank. 6.1.6 EPC Gen2 Tag Kill.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 27 6.2.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 28 6.2.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 29 6.2.4 Single tag writing and write with UID 1、Single Tag operation interface，choose the data address you want to write in the ISO Write menu item，click“Write”button to write data； 2、When operate writing data with UID，except for inputting the single byte data that needs to write，it also needs to put the UID number of tag，choose the start address that want to write，click“Write With UID”button to write data； 6.2.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 30 return query result in “Result” column，like“Had locked”and“Not lock”； Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C. Post：518057 Phone：0755-2654 6392 E-mail：technical@marktrace.com FAX：0755-2655 3743 Website：www.marktrace.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 31 7 Reader struction and installation sketch map 1、MR6121E integrated reader installation sketch map： Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C. Post：518057 Phone：0755-2654 6392 E-mail：technical@marktrace.com FAX：0755-2655 3743 Website：www.marktrace.
◢MR6121E UHF reader user manual（Ver 1.0）◣ 32 8 Secondary development User can make secondary development for reader application software if needing. We provide SDK，which supports VC++、C#、JAVA and so on，the use of SDK,please refer to《MR6100 serial reader SDK instruction》。 Address： Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P. R.C. Post：518057 Phone：0755-2654 6392 E-mail：technical@marktrace.com FAX：0755-2655 3743 Website：www.marktrace.
◢MR6121E UHF reader user manual（Ver 1.
