User's Manual

1）User can configure IP address、RF power、frequency、antenna port、applied
mode、read card indicating etc.,
2）Each antenna port RF power can be configurable, range: 0-31dBm；
3）Frequency standard: China Frequency、US Frequency、EU Frequency
three type standard hopping frequency selectable；
4）Applied mode:“Favor speed” and“Favor quantity” two mode
selectable“Favor speed” for single tag or small batch tags quick speed read
mode；
“Favor quantity”for big batch tags read mode；
2、Operating mode configuration
1）In operating mode configuration, user can configure reader to be timming
working mode or pin trigger working mode，timer’s timing interval can be
configure between 10-990ms；When in trigger working mod, reading
maximum lasting time can be configure as 255s；
2）Read tag type can be 18000-6B or EPC G2，also can be configure read both
at same time（expand function）；
3）When read EPC tag，read area can select as EPC、TID or USER memory；
6B tag cannot select area；
4）User can select read tag’s start address and read data length，EPC tag data
use word as unit，6B tag data use byte as unit;
5）User filter repeat tag，Filter set one slide time window，only new data which
not show in box can be buffer or direct output；