User's Manual
2、Match setting, reader reads and displays only the condition matched tag.
3、Mismatch setting, Reader doesn’t read and display the condition matched
tag.
4、Empty the input value for cancel the Tag filter rule.
5、If setting EPC Membank as the Tag filter rule, the valid Word Addr is 2.
6、After set the EPC tag filter rule, this rule is valid for all EPC tag detect.
7、After set the EPC tag filter rule, this rule is valid for all the time unless the
reader is power off or reset.
6.1.4 EPC Gen2 Tag Lock
1、On Gen2 EPC Single Tag interface’s Gen2 Secured Lock menu for the EPC
Gen2 Tag Lock setting. With Access Password, it can lock Reserve Membank,
EPC Membank, and USER Membank in different lock level. Take below image
for the reference.
2、EPC Gen2 Tag Lock level are unlock, unlock forever, and secure lock, lock
forever
1)Unlock means the tag is not to encrypted the tag
2)Unlock forever means the tag will not be locked forever
3)On Secure Lock, RESERVE Membank only can be read and write with