User's Manual

3.2 the fixation and height adjustment of the reader
¾ When frank fitting ,it demands that the crutch dia.of the reader 50 to 60mm while length2.2m
Using stain steel material that more than 1.3m thick is the best choice. Fix the reader to the
top of the crutch with the self-provided fastening pin in the casing of MR6034A
reader .Adjust the height from the center of MR6034A reader to the level of carriage way,
according to the vehicle style(mainly indicates the oversize vehicle and landauter), generally
about 2.0m(from 1.8m to 2.2m)
¾ When crutch top fitting like the shape of letter L,it demands the dia. of L shape (or
dragon-door shape) crutch is from 60 to 80mm,while rail dia.50 to 60mm.It is best to sue
stain steel material that more than 12 to 20mm thick. Fix the MR6034A reader to the rail that
near the middle carriage drive. The height that the rail to the ground is needed to adjust from
1.0m to 4.0m,according to the height of vehicle
3.3 Setting sketch map of the reader
Picture 5 the sketch map of the MR6034A reader
Attention：MR6034A reader can connect four antennas which are fixed on different sites so as to read the
electronic tag on goods smoothly.