gateway User Guide User Guide C9200-4L(NA) 4G IoT Wireless Gateway Guangzhou Robustel LTD www.robustel.
Robustel C9200 User Guide About This Document This document provides hardware and software information of the Robustel 4G IoT Wireless Gateway, including introduction, installation, and configuration. Copyright© 2019 Guangzhou Robustel LTD All rights reserved. Trademarks and Permissions , are trademarks of Guangzhou Robustel LTD. All other trademarks and trade names mentioned in this document are the property of their respective owners.
Robustel C9200 User Guide Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.
Robustel C9200 User Guide Protecting Your 4G IoT Wireless Gateway To ensure error-free usage, please install and operate your 4G IoT Wireless Gateway with care. Do remember the following: Do not expose the 4G IoT Wireless Gateway to extreme conditions such as high humidity / rain, high temperature, direct sunlight, caustic / harsh chemicals, dust, or water. Do not try to disassemble or modify the 4G IoT Wireless Gateway. There is no user serviceable part inside and the warranty would be void.
Robustel C9200 User Guide Regulatory and Type Approval Information Table 1: Directives 2011/65/EU The European RoHS 2011/65/EU Directive was issued by the European parliament and the European Council on 1 July 2011 on the restriction of the use of certain Hazardous substances in electrical and electronic equipment. 2012/19/EU The European WEEE 2012/19/EU Directive was issued by the European parliament and the European Council on 24 July 2012 on waste electrical and electronic equipment.
Robustel C9200 User Guide Table 3: Toxic or Hazardous Substances or Elements with Defined Concentration Limits Name of the Part Hazardous Substances (Pb) (Hg) (Cd) (Cr (VI) ) (PBB) Metal parts o o o o o (PBDE) o Circuit modules o o o o o o Cables and cable assemblies o o o o o o Plastic and polymeric parts o o o o o o o: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.
Robustel C9200 User Guide Document History Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions. Date 5 Nov, 2018 27 Nov, 2018 Doc Version v.1.0.0 v.1.0.1 RT_UG_C9200_v.1.0.1 for NA Change Description Initial release Added the FCC Statement 27 Nov.
Robustel C9200 User Guide Contents Chapter 1 Product Concept................................................................................................................................... 9 1.1 Key Features............................................................................................................................................ 9 1.2 Package Contents................................................................................................................................... 10 1.
Robustel C9200 User Guide Chapter 1 Product Concept 1.1 Key Features Robustel is a leading global industrial IoT/M2M (machine and machine communication) products and solutions, providing customers with industrial-grade 4G IoT Wireless Gateway, gateways, modems, cloud management platforms, and end-to-end solution.
Robustel C9200 User Guide Supports remote connection of Robust VPN platform Supports TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/ SMTP and other protocols Built-in security encryption chip Built-in Watchdog, Timer Supports RTC and power-off save; Normal operating temperature: -20 to +70°C. 1.2 Package Contents Before installing your C9200 Gateway, verify the kit contents as following. Note: The following pictures are for illustration purposes only, not based on their actual sizes.
Robustel C9200 User Guide 5 x cross recessed countersunk head tapping screw (ST3 * 6; type F) Optional Accessories (sold separately) BT antenna (RP- SMA-J antenna) Stubby antenna LTE 4G antenna (SMA-J antenna) Stubby antenna sucker antenna sucker antenna Note: If any of the above items is missing or damaged, please contact your Robustel sales representative. 1.3 Specifications Kernel CPU: ARM926EJ-S core, main frequency 300MHz Memory: 64MB DDR2 RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide Storage: 64MB FLASH Cellular Interface Number of antennas: 2 Connector: Standard SMA-K SIM：1（3.0V/1.8V） Band: LTE FDD: B2/ B4/ B12 WCDMA: B2/ B4/ B5 Bluetooth interface Number of antennas: 1 Connector: Standard RP-SMA-K Chip: Nrf52832-Nordic Serial port Number of interfaces: 1 Port type: 4-bit 3.5mm terminal Baud rate: 9600bps, maximum rate: 115200bps RS-422:TX-A/TX-B/RX-A/RX-B CAN interface Number of interfaces: 1 Port type: 3-bit 3.
Robustel C9200 User Guide Power Supply and Consumption Power supply interface: 3-position 5.08mm terminal Input voltage:9-36 VDC Power consumption: 60-80ma @ 12V in idle state Communication status 210ma (peak) @ 12V Physical Characteristics Housing: PC + ABS environmental protection plastic Dimension: (L x W x H): 136.9mm x 97.4mm x30.
Robustel C9200 User Guide 1.5 Ordering Information Model Cellular antennas Bluetooth antennas Frequency Bands 4G* 3G 2G Operating Environment Relative Humidity C9200-4L 1 1 LTE FDD: B2/ B4/ B12 WCDMA : B2/ B4/ B5 -25 to +70 °C 5 to 95% RH Note: For more Frequency information, please contact your Robustel sales representative. RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide Chapter 2 Hardware Installation 2.
Robustel C9200 User Guide Name RUN Color Green MDM Green RSSI Green Green Green Green Green Status On, fast blinking(250ms) On, slow blinking(500ms) Off On, solid On, blinking Off On, solid On, slow blinking On, fast blinking Off On, blinking Green On, blinking Green On, blinking LINK DEV MESH Description Gateway is powered on Gateway starts operating Gateway is powered off Link connection is working In link communication Link is disconnected High Signal (CSQ:22-31) Medium Signal (CSQ:11-21) Lo
Robustel C9200 User Guide Note: 1. Use the specific M2M SIM card when the device is working in extreme temperature, because the regular card for long-time working in harsh environment will be disconnected frequently. 2. Do not touch the metal of the card surface in case information in the card will lose or be destroyed. 3. Do not bend or scratch the card. 4. Keep the card away from electricity and magnetism. 5. Make sure router is powered off before inserting or removing the card. 2.
Robustel C9200 User Guide 2.5 Mount the 4G IoT Wireless Gateway The 4G IoT Wireless gateway can be can be placed on a desktop or magnet installation. Magnet installation method 2.6 Connect the 4G IoT Wireless Gateway to a Computer Use a microUSB data cable to connect the microUSB interface of 4G IoT Wireless Gateway to the USB interface of the computer. Micro USB RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide 2.7 Power Supply COLOR POLARITY RED + YELLOW - Connect the power adapter to the gateway power interface as shown in the figure above. Note: there are positive and negative wires on the power adapter. The wire of the red connector is connected to the positive pole of the gateway through the terminal, and the wire of the Yellow connector is connected to the negative pole of the gateway through the terminal. RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide Chapter 3 Initial Configuration The 4G IoT Wireless Gateway can be configured through your web browser that including IE 8.0 or above, Chrome and Firefox, etc. A web browser is included as a standard application in the following operating systems: Windows 7/10, etc. It provides an easy and user-friendly interface for configuration.
Robustel C9200 User Guide 2. Click the device, right-click to select update driver software, and select Browse my computer for driver software in the pop-up box; 3. Select let me pick from a list of device drivers on my computer; RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide 4. Select network adapters in the list and click next; 5. Find Microsoft Corporation in the manufacturer on the left and select Remote NDIS Compatible Device in the right network adapter and click Next. RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide 6. Select Yes if the following window pops up; 7. After installing the driver, you can view the new network adapter in device manager. 3.1.2 IP address configuration of PC end After the PC successfully loads the network adapter driver, the PC configures its IP address through the following methods: configure a static IP address on the local connection of the PC in the same subnet as the 4G Internet of things wireless communication terminal, and then access the device interface.
Robustel C9200 User Guide 2. Click on Properties In the ethernet adapter Status window,; RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide 3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties; 4. Click and configure Use the following IP address to manually configure the PC with a static IP address on the same subnet as the address of 4G IoT wireless gateway; 5. Click OK to complete the configuration. RT_UG_C9200_v.1.0.1 for NA 27 Nov.
Robustel C9200 User Guide Glossary Abbr.
Robustel C9200 User Guide Glossary Guangzhou Robustel LTD Address: 3rd Floor, Building F, Kehui Park, No.95 Daguan Road, Add: Guangzhou, China 510660 Tel: 086-20-29019902 86-20-29019902 Email: info@robustel.com Web: www.robustel.com RT_UG_C9200_v.1.0.1 for NA 27 Nov.
