FCC ID: 2AR23-T1 Quick Start Guide Note: Pull the case to open it. The earbuds with R / L symbol. Left will be the master earbud and connect to your device, the right will automatically connect to the left. Earbuds automatically turn on when removed from the case. They turn off and charge when placed back in the case. Step 1: Wear Best fit & best sound Try all the ear tips to find the best fit and the best sound.
Wear Insert the earphones with the ear tip directed towards your ear canal. Twist gently until fit comfortably and feel secure in your ear. Note: When you take the earphones out of the case, double-press MFB to enter pairing mode, you have 3 mins to paired with your device, or they out pairing mode. Put them in the case to wake them back up. Step1: Wear Step 2: Pair with Bluetooth 1.Turn on the Bluetooth on your device. 2.
.On your device, go to Bluetooth menu, select for: MS01B(BES), pair and connect. You will hear “Connected” when pairing is complete. Note: Only the left earbud will connect to your device. The right one will connect to the left. The left earbud may also be used as a single headset. Tip: When you hear “Right” from right earbud, “Left” from left earbud, both earbuds are connected for stereo use. When you hear “Connected” your earbuds are connected to your device.
※ ※ ※ 1) 2) 3) Press once to answer an incoming call, or press and hold MFB for 2 seconds to reject it. Press once to end a call. When you are talking on the phone and receive another incoming call, Press MFB once time, end first call and answer new coming call; Long press MFB 2 seconds, answer new call and first call will be placed on hold; if new coming call answer and first call on hold, long press MFB 2 seconds, switching between two calls. Note: All calls will be heard in the left earbud only.
Charge the case Charging the case by plugging in the charging cable. The case light turns on when it is charging. Charge level Your earbuds let you know when your battery level is low. Every 20 seconds you will hear “Battery low” when there is 15 minutes of battery level.
Charging Full charge Pairing Steady green light Light turn off Blinking blue and green Note: The earbud lights turn off after full charge to conserve battery. The earbuds will continue to charge until full. Case statue lights When your case is plugged into a charge cable for charging , you will see charging lights. Charging Steady blue light Full charge Light turn off Battery low Slow blinking blue Note: Your battery is designed to last life of the product.
Earbuds LED Indicator Status Charging Green LED Light Charging Complete LED Light Off Power ON Blue LED light flashes for one second Power Off Green LED light flashes for one second Pairing Mode LED light flashes in green and blue alternately Power On (Not Connected) Blue LED light flashes once every 2 seconds Power On (Connected) Blue LED light flashes once every 5 seconds Power On (Talking) Blue LED light flashes once every 5 seconds Power On (Dial Call) Blue LED light flashes once every
11. Earbuds with Charging case: Music Time:6~7.5 hours / Talking Time:6 hours 12.Earbuds (single charge): Music Time:2~2.5 hours / Talking Time:2 hours ※ Working time of main earphone in the state of two earphones:＜2.5 Hours 13.Bluetooth version: Bluetooth 4.2 14.Support Profile: HSP, HFP, A2DP, AVRCP 15.The remote control to speaker: MFB (Play/Pause/Stop/Next Song/Previous Song) 16.Paring name: MS01B(BES) 17.Pass: 0000 18.RF transmit: Class-2 19.Transmission Range (Hz): 2.40GHz ~ 2.48GHz 20.
Use this product responsibly MS01B(BES) are designed to give the user great sounding wireless earbuds. However the product should be used responsibly. Safety instructions for use To avoid hearing damage, keep the volume at a moderate level. Avoid listening to music at loud volume levels for prolonged periods of time as this may cause permanent hearing damage or hearing loss. Your hearing is delicate and highly sensitive so please listen to your music responsibly.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
